https://fr.opensuse.org/api.php?action=feedcontributions&user=Gomiz&feedformat=atomopenSUSE Wiki - Contributions de l’utilisateur [fr]2024-03-29T06:05:23ZContributions de l’utilisateurMediaWiki 1.27.7https://fr.opensuse.org/index.php?title=Utilisateur:Gomiz&diff=10944Utilisateur:Gomiz2009-04-19T17:57:07Z<p>Gomiz : </p>
<hr />
<div><h1><span style="color:#C37903;">Salut à tous.</span></h1><br />
Ca me fait plaisir de pouvoir participer surtout que j'adore <span style="color:#008F00;">Suse!</span> que j'ai découvert un peu par hasard.<br />
<br><br><br />
Je suis actuellement étudiant en école d'ingénieur à l'UTBM sur Belfort(90) en génie électrique et systèmes de commande<br />
<br><br><br />
<br><br><br />
Liens pour la création Wiki : <br><br />
----<br />
[http://fr.opensuse.org/Cat%C3%A9gorie:Pages_%C3%A0_traduire Pages à traduire]<br> <br />
[http://fr.opensuse.org/Liste_des_cat%C3%A9gories Liste des catégories] ex: à traduire, doc,... <br><br />
[[:Mod%C3%A8les]]<br><br />
[http://meta.wikimedia.org/wiki/Aide:Syntaxe_wiki Syntaxe Wiki] <br><br />
[http://fr.opensuse.org/Glossaire_d%27%C3%A9quivalences_entre_l%27anglais_et_le_fran%C3%A7ais Equivalence anglais technique et francais]<br><br />
[http://fr.opensuse.org/Communiquer#Forums Forums]</div>Gomizhttps://fr.opensuse.org/index.php?title=SDB:PS3&diff=10920SDB:PS32009-04-14T13:38:23Z<p>Gomiz : </p>
<hr />
<div>{{Page à traduire}}<br />
<br />
[[en:PS3]]<br />
[[ja::PS3]]<br />
<br />
{{Intro-frame|La PLAYSTATION 3 (PS3) est basée sur un [http://fr.wikipedia.org/wiki/Cell_(processeur) Processeur Cell] de 3.2Ghz, avec 256MByte de GDDR-VRAM. Le processeur est compatible [[:en:POWER%40SUSE|PowerPC]]. The alliance of (IBM/Sony/Toshiba) who created the Cell processor have been active creating Linux kernel patches for the processor since Linux Kernel 2.6.13. Sony has created kernel patches specific for the PS3 in Linux Kernel 2.6.22, as well as maintaining the GNU toolchain (gcc, binutils etc).}}<br />
<br />
<br />
{|<br />
|-<br />
|[[Image:Ps3.jpg|400px]]<br />
|__TOC__<br />
|}<br />
{{VersionNote|11.0 & 10.3|The information below is for openSUSE 11.0}}<br />
<br />
==Hardware Requirements==<br />
* A computer to download and copy files on to media.<br />
* Playstation3 with:<br />
** USB Keyboard and Mouse (A Wireless USB Keyboard & Mouse is even better)<br />
* Any of the following recording media:<br />
** USB Flash or HD drive<br />
** CD-R, CD-RW, DVD-R, DVE+R, DVD-RW, DVD+RW, BD-R, or BD-RE disc<br />
** If the PS3 has memory card slots: Memory Stick, SD memory card, or CompactFlash.<br />
<br />
Note: Just as with any system, having both a keyboard and mouse simplifies things a lot. But it '''is''' possible to install with only a mouse, and possibly even simpler with only a keyboard!<br />
<br />
'''Tip:''' With only a mouse it is possible to copy-paste characters from Help tabs.<br />
<br />
==Software Requirements==<br />
* [http://download.opensuse.org/ openSUSE 11.0 or 10.3 for PPC]<br />
* [http://download.opensuse.org/distribution/10.3/repo/oss/PS3/otheros/otheros.bld Other OS Boot loader 10.3] or [http://download.opensuse.org/distribution/11.0/repo/oss/PS3/otheros/otheros.bld Other OS Boot loader 11.0] available on full installation media as well (but not on Mini CD for Network install).<br />
<br />
== Instructions ==<br />
<br />
=== Preparing Media ===<br />
<br />
Download the PPC edition of OpenSuse 10.3 or 11.0 and burn it to a DVD or CD media using your favorite burning tool.<br />
<br />
''' NOTE: The OpenSUSE 11.0 mini-CD network install will also work so it not necessary to download the full DVD but in that case you will need to put the otheros.bld file on separate media such as a USB key.<br />
<br />
''' NOTE: PS3 bootloader can also be updated from OpenSuse installation media (but how?)'''<br />
<br />
'''Technical Note'''<br />
* During the PS3 OtherOS install step, your media should have the following folder structure, It is a requirement to use single-byte characters only.<br />
<br />
PS3<br />
|-otheros<br />
|-otheros.bld<br />
<br />
If for some reason that file structure is not available on your OpenSUSE install media, is possible to download the Boot loader here [http://download.opensuse.org/distribution/SL-OSS-factory/inst-source/PS3/otheros/otheros.bld otheros.bld] and it can be installed from a separate media such as a USB key or drive.<br />
<br />
=== Installation ===<br />
<br />
====Preparing the PS3 ====<br />
<br />
'''NOTE:''' Updating your PS3 to the latest firmware is recommended before proceeding<br />
To keep game settings/progress and downloads do (only tested with latest firmware)<br />
* Attach an external (USB) drive<br />
* Select '''Settings''' -> '''System Settings''' -> '''Backup'''.<br />
* Select '''Settings''' -> '''System Settings''' -> '''Format Drive'''. Create two partitions one for the PS3s normal use and one for openSUSE. ''Note that you will '''lose any non backuped''' game info''.<br />
* Restore backup (same menu)<br />
Note: When restoring the complete backup messages from PS3 sounds like it will restore the complete disk as it was before the partitioning, but it will not.<br />
* Remove the external (USB) drive (assuming it doesn't also contain your otheros.bld file).<br />
* Insert the media that contains the otheros.bld file structure as mentioned above which should be your OpenSUSE install media but could also be anything. A USB key or drive is probably easiest but in theory any valid media would be fine.<br />
* Select '''Settings''' -> '''System Settings''' -> '''Install Other OS'''. The PS3 will display the installers it can find. If it can't find the otheros.bld file then your file structure is probably wrong.<br />
* Click '''OK''' to start the installer.<br />
* Follow the instructions of the Sony installer.<br />
* To boot into the Other OS, select '''Settings''' > '''System Settings''' > '''Default System''' > '''Other OS'''. This causes the 'Other OS Boot loader' to be loaded on every boot. {{Note|To force the PS3 to boot up normally hold down the Power button for about 5 seconds or more at power on. This is in case you do not have a keyboard. With a keyboard you can use ps3-boot-game-os command to reboot to the PS3 game os. Challenge: do this using only a mouse. Hint: copy-paste from on screen texts.}} [Warning: Holding down the power button in this way resets many PS3 settings! I had to restore them from backup. I also could not find ps3-boot-game-os. --[[User:DiskCrasher|DiskCrasher]] 00:12, 22 September 2008 (UTC)]<br />
[With firmware 2.3, just typing 'game' at the kboot prompt will reboot into gameOS --[[User:SurplusIguana|SurplusIguana]] 13:13, 11 October 2008 (UTC)]<br />
<br />
====Installing openSUSE 11.0 or 10.3 ====<br />
<br />
* Insert openSUSE installation media in the PS3<br />
* Boot ''Other OS'', select '''Settings''' > '''System Settings''' > '''Default System''' > '''Other OS'''.<br />
* Select the "install" boot option from boot screen and press enter<br />
* Graphical installer will start, just follow on-screen instructions<br />
<br />
'''''Note:''' it is not recommended to enable Online Repositories during installation as the PS3 might run out of memory. Please add Online Repositories *after* the installation using YaST.''<br />
<br />
== Post Installation ==<br />
''' Video Resolution Fix '''<br />
<br />
The default resolution of the PS3 under OpenSUSE Linux is too small to be usable and the normal tools (sax2) do not work. The solution is to modify the kernel boot parameters by modifying the file /etc/kboot.conf adding the values video=ps3fb:mode:4 as follows:<br />
<br />
default=openSuSE<br />
timeout=20<br />
openSuSE="/dev/ps3da5:/vmlinux initrd=/dev/ps3da5:/initrd quiet panic=42 sysrq=1 video=ps3fb:mode:X"<br />
<br />
Where 'X' is a value selected from the following table:<br />
<br />
{| class="wikitable" border="1"<br />
|-<br />
|YUV 60Hz<br />
|1:480i<br />
|2:480p<br />
|3:720p<br />
|4:1080i<br />
|5:1080p<br />
|-<br />
|YUV 50Hz<br />
| 6:576i<br />
| 7:576p<br />
| 8:720p<br />
| 9:1080i<br />
| 10:1080p<br />
|-<br />
|RGB 60Hz<br />
| 33:480i<br />
| 34:480p<br />
| 35:720p<br />
| 36:1080i<br />
| 37:1080p<br />
|-<br />
|RGB 50Hz<br />
| 38:576i<br />
| 39:576p<br />
| 40:720p<br />
| 41:1080i<br />
| 42:1080p<br />
|-<br />
|VESA<br />
|11:WXGA<br />
|12:SXGA<br />
|13:WUXGA<br />
|<br />
|<br />
|}<br />
<br />
So for example, if you want 1080i at YUV 60Hz, the line would look like this:<br />
<br />
openSuSE="/dev/ps3da5:/vmlinux initrd=/dev/ps3da5:/initrd quiet panic=42 sysrq=1 video=ps3fb:mode:4"<br />
<br />
For overscan (fullscreen) mode, add 128 to the mode value.<br />
<br />
To turn dither mode on, add 2048 to the mode value.<br />
<br />
''' Install PS3 Specific Packages '''<br />
<br />
The ps3-utils package is available for OpenSUSE. You can easily it with<br />
# zypper install ps3-utils<br />
<br />
Do not install the kernel-ps3 package. This is only a "bootstrap" kernel for the early part of the ps3 boot process.<br />
<br />
''' Audio (no sound) Fix '''<br />
Please check that your account is in group "audio". To check this open yast, go to "Security and Users" and select "User Management"<br />
<br />
== Known Problems ==<br />
<br />
''' General issues '''<br />
<br />
* The kernel-ps3 package (as of 2.6.25.5-1.1-ps3) is missing the CONFIG_SND_PS3 option so you won't get any sound unless you fix that and recompile the kernel. [Note: I did not have any problems after installing openSUSE 11.0 --[[User:DiskCrasher|DiskCrasher]] 00:05, 22 September 2008 (UTC)].<br />
<br />
* The kernel tries to autodetect the best resolution for your screen. In case you end up with a black screen and your monitor is out of sync try pressing 'c' and afterwards '1'. This will switch the resolution to 720p. However, this will not affect the kernel you are going to boot via kexec. In case you want to manually specify a resolution append the following to the kernel commandline "video=ps3fb:mode:<X>", where <X> specifies the video mode you want to use. [0 <= X <= 42]<br />
<br />
* During install the resolution might not be large enough to display the buttons at the bottom of the install stages. Pressing ALT-N works as "Next" even if the button is not visible. This also applies to the user creation screen but you must fill in the the default user with password before the button will work.<br />
<br />
* Several people have reported problems getting wireless 802.11 to work (see [http://en.opensuse.org/Talk:PS3 Discussion]).<br />
<br />
== Resources ==<br />
*[http://www.kernel.org/pub/linux/kernel/people/geoff/cell PS3 Linux Distributor's Starter Kit]<br />
*All of the edits I make to this page are also described in more detail on my blog [http://www.johnlange.ca/tech-tips/play-station-3-ps3/opensuse-110-on-the-ps3/ OpenSuSE 11 on the PS3]<br />
<br />
== Other Distros on PS3 ==<br />
<br />
* [http://ps3.qj.net/PS3-Linux-The-void-has-been-filled-Full-install-instructions-for-Fedora-Core-5-/pg/49/aid/73144 Fedora 5 on PS3]<br />
* [http://ubuntuforums.org/showthread.php?t=316047 Ubuntu on PS3] - Installs Ubuntu by using basic Fedora installation<br />
<br />
<small>PS3, PLAYSTATION, Memory Stick and any other trademarks that appear on this page are owned by their respective owners, but you already knew this.</small></div>Gomizhttps://fr.opensuse.org/index.php?title=openSUSE:One_Click_Install&diff=8075openSUSE:One Click Install2008-05-17T22:47:34Z<p>Gomiz : fin traduction</p>
<hr />
<div>=Installation en Un Seul Clic (One Click Install)=<br />
<br />
== Aperçu ==<br />
L'installation "en un seul clic" rend plus facile l'installation de programmes pour les utilisateurs, peut importe où se situe ce programme.<br />
<br />
Avant, les utilisateurs devaient suivre les instructions expliquant comment ajouter des dépôts de paquetages, et sélectionner certains paquetages pour l'installation. Maintenant, un utilisateur doit seulement cliquer sur un lien sur une page Web, ou sur un fichier d'installation sur un CD. Ce faisant, il lui sera présenté un assistant qui le guidera tout au long du processus d'installation en sélectionnant pour lui les dépôts et les paquetages.<br />
<br />
[[Image:OneClickInstallIntro1.png]]<br />
<br />
[[Image:OneClickInstallIntro2.png]]<br />
<br />
Si vous êtes un utilisateur openSUSE, vous auriez probablement remarqué ces liens d'installation apparaissant à divers endroits. <br />
<br />
[[Image:OneClickInstallIntroBuildService.png]]<br />
<br />
L’installation en "un seul clic" fonctionne en utilisant un format de fichier appelé YMP. Ce fichier YMP contient des instructions qui ordonnent au système de gestion des paquets lesquels il faut installer, et où ils se trouvent. Il s'agit essentiellement d'un tutoriel d'installation du logiciel qui peut être comprise par le système.<br />
<br />
Il est possible de spécifier des instructions pour plusieurs systèmes d'exploitation dans un fichier. Donc, ajouter le support d’installation pour une autre distribution est juste une question de mise en œuvre d’une application qui va prendre en compte un de ces fichiers d’instructions et de les convertir selon les instructions de votre propre gestionnaire de paquetage.<br />
<br />
== Utilisateurs ==<br />
Si vous êtes un utilisateur openSUSE et vous avez une question sur l'Installation en "un seul clic", voir la [[One_Click_Install/UserFAQ|page de Questions & réponses]].<br />
<br />
== Fournisseurs de logiciels ==<br />
Si vous êtes un fournisseur de logiciels ou développeur et que vous souhaitez utiliser l'Installation en "un seul clic" pour rendre votre logiciel facile à installer par les utilisateurs openSUSE, voir la [[One_Click_Install/ISV|page ISV]].<br />
<br />
== Développeurs ==<br />
Si vous êtes développeur pour un autre distributeur Linux et intéressé à mettre en œuvre l'Installation en "un seul clic" ou un concept similaire pour votre distribution, voir la [[One_Click_Install/Développeurs|page développeurs]]<br />
<br />
[[de:1-Klick-Installation]]<br />
[[en:One_Click_Install]]<br />
[[es:One_Click_Install]]</div>Gomizhttps://fr.opensuse.org/index.php?title=openSUSE:One_Click_Install_UserFAQ&diff=8072openSUSE:One Click Install UserFAQ2008-05-15T15:49:44Z<p>Gomiz : </p>
<hr />
<div>{{Page à traduire}}<br />
= One Click Install FAQ =<br />
<br />
Here are some answers to frequently asked user questions about One Click Install <br />
<br />
== Is it safe? ==<br />
<br />
It is no less safe than following a set of instructions for installing software manually. All the same safeguards are in place. You will have to confirm the exact list of changes that will be made to your system before you give the installer permissions to install the software. You will also be asked to confirm that you trust any software vendor that you have not previously trusted. <br />
<br />
[[image:YaSTRepositoryUntrustedKey.png|thumb|right]]<br />
<br />
It is certainly not safe to blindly install software you do not trust, or know the origins on your computer. This applies to any method of installation. One Click Install is no less safe than any other method, except that by making it easier to install software there is a greater risk that users will not check what they are installing.<br />
<br />
There are things that can be done to make things even safer in the future. For example, the keys the packages are signed with could be looked up online, and if the key holder has a poor reputation the user could be warned. <br />
<br />
== I get a conflict when installing software using a one click install link ==<br />
<br />
Have a look at the proposed solutions and pick the one that seems best. Often these conflicts will simply be confirmation requests for changing the vendor of an already installed package. <br />
<br />
If you save a list of any conflicts you get, and send them to the person who supplied the one click install link, he or she may be able to modify the instructions file or the packages themselves to avoid the conflicts in the future.<br />
<br />
== Can I Install One Click Install Links from the command line? ==<br />
<br />
From openSUSE 11.0 you can. Simply run /sbin/OCICLI <One Click Install Link><br />
<br />
It behaves in a similar manner to the GUI interface, asks you to confirm changes, and then prompts for the root password. Currently it is not possible to customise the proposal in the command line interface.<br />
<br />
If you want to have the command line support on openSUSE 10.3 you can install [http://benjiweber.co.uk/ymp.ymp the updated one click install handler.]<br />
<br />
== Can I use One Click Install Links on older distributions? ==<br />
<br />
It is possible to install the one click install client on openSUSE 10.2, and SUSE Linux Enterprise Desktop.<br />
<br />
To do so you need to add the openSUSE:Tools repository to YaST/zypper [[Add_Package_Repositories_to_YaST]] and install the yast2-metapackage-handler package. <br />
<br />
{{VersionNote|10.2|<br />
[http://download.opensuse.org/repositories/openSUSE:/Tools/openSUSE_10.2/ http://download.opensuse.org/repositories/openSUSE:/Tools/openSUSE_10.2/]<br />
}}<br />
{{VersionNote|SLE10|<br />
[http://download.opensuse.org/repositories/openSUSE:/Tools/SLE_10/ http://download.opensuse.org/repositories/openSUSE:/Tools/SLE_10/]<br />
}}<br />
<br />
[[de:1-Klick-Installation/NutzerHGF]]</div>Gomizhttps://fr.opensuse.org/index.php?title=Utilisateur:Gomiz&diff=8071Utilisateur:Gomiz2008-05-14T21:07:46Z<p>Gomiz : </p>
<hr />
<div><h1><span style="color:#C37903;">Salut à tous.</span></h1><br />
Ca me fait plaisir de pouvoir participer surtout que j'adore <span style="color:#008F00;">Suse!</span> que j'ai découvert un peu par hasard.<br />
<br><br><br />
Je suis actuellement étudiant en école d'ingénieur à l'UTBM sur Belfort(90) en génie électrique et systèmes de commande<br />
<br><br><br />
TOEIC:765/990 <br><br />
Zertifikat Deutsch:255/300 <br />
<br><br><br />
Liens pour la création Wiki : <br><br />
----<br />
[http://fr.opensuse.org/Cat%C3%A9gorie:A_traduire Pages à traduire]<br><br />
[http://fr.opensuse.org/Liste_des_cat%C3%A9gories Liste des catégories] ex: à traduire, doc,... <br><br />
[[:Mod%C3%A8les]]<br><br />
[http://meta.wikimedia.org/wiki/Aide:Syntaxe_wiki Syntaxe Wiki] <br><br />
[http://fr.opensuse.org/Glossaire_d%27%C3%A9quivalences_entre_l%27anglais_et_le_fran%C3%A7ais Equivalence anglais technique et francais]<br><br />
[http://fr.opensuse.org/Communiquer#Forums Forums]</div>Gomizhttps://fr.opensuse.org/index.php?title=openSUSE:One_Click_Install&diff=8046openSUSE:One Click Install2008-05-10T23:06:21Z<p>Gomiz : </p>
<hr />
<div>{{Page à traduire}}<br />
<br />
<br />
=Installation en un seul clic (One Click Install)=<br />
<br />
== Aperçu ==<br />
L'installation en seul clic rend plus facile pour les utilisateurs l'installation de programmes, peut importe où se situe ce programme.<br />
<br />
In the past, users would have to follow instructions explaining how to add package repositories, and select certain packages for installation. Now a user need only click on a link on a webpage, or a Setup file on a CD. Upon doing so, he or she will be presented with a wizard which will guide him or her through the installation process.<br />
<br />
[[Image:OneClickInstallIntro1.png]]<br />
[[Image:OneClickInstallIntro2.png]]<br />
<br />
If you are an openSUSE user, you will probably have noticed these install links appearing in various places. <br />
<br />
[[Image:OneClickInstallIntroBuildService.png]]<br />
<br />
One Click Install works by using a special file format called YMP. This YMP file contains instructions which tell the package management system which packages to install, and where they are located. It is essentially a tutorial for installing the software that can be understood by the system.<br />
<br />
It is possible to specify instructions for multiple operating systems in one file. So adding support for One Click Install to another distribution is just a matter of implementing an application that will take one of these instructions files and convert into instructions for your own package management.<br />
<br />
== Users ==<br />
If you are an openSUSE user and have a question about One Click Install, see the [[One_Click_Install/UserFAQ|Questions & Answers page]].<br />
<br />
== Software Vendors ==<br />
If you are a software vendor or developer and wish to use One Click Install to make your software easily installable by openSUSE users, see the [[One_Click_Install/ISV|ISV Page]].<br />
<br />
== Developers ==<br />
If you are a developer for another linux distribution and are interested in implementing One Click Install or a similar concept for your distribution, see the [[One_Click_Install/Developer|developer page]]<br />
<br />
[[de:1-Klick-Installation]]<br />
[[en:One_Click_Install]]<br />
[[es:One_Click_Install]]</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:OneClickInstallIntroBuildService.png&diff=8045Fichier:OneClickInstallIntroBuildService.png2008-05-10T23:04:39Z<p>Gomiz : </p>
<hr />
<div></div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:OneClickInstallIntro2.png&diff=8044Fichier:OneClickInstallIntro2.png2008-05-10T23:03:50Z<p>Gomiz : </p>
<hr />
<div></div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:OneClickInstallIntro1.png&diff=8043Fichier:OneClickInstallIntro1.png2008-05-10T23:01:59Z<p>Gomiz : </p>
<hr />
<div></div>Gomizhttps://fr.opensuse.org/index.php?title=Syntek&diff=7981Syntek2008-04-13T11:11:59Z<p>Gomiz : /* Configuration */</p>
<hr />
<div>[[Catégorie:Documentation]]<br />
<!--documentation tirée de http://doc.ubuntu-fr.org/syntek et http://www.alionet.org--><br />
{{Intro-frame|Sont regroupées ici, les informations sur les webcams à base de chipset Syntek.<br><br />
Un driver est cours de développement : [http://syntekdriver.sourceforge.net syntekdriver.sourceforge.net] Ce driver nécessite un Kernel 2.6.20 ou plus.<br />
Le driver est désormais disponible dans les dépôts de openSUSE. Il suffit de rajouter le dépôt : http://download.opensuse.org/repositories/drivers:/webcam/openSUSE_10.3/ et d'installer le paquetage <tt>stk11xx</tt>}}<br />
<br />
<br />
__TOC__<br />
<br />
== Compatibilité ==<br />
De nombreux portables Asus et Packard Bell intègrent une webcam de ce type. Pour savoir si vous êtes dans ce cas, faites un ''lsusb'' et cherchez un périphérique dont l'identifiant commence par **05e1**:???? (Syntek Semiconductor Co., Ltd) ou **174f**:???? (Syntek Semicon.), comme ci-dessous: <br><br />
$ lsusb<br />
Bus 005 Device 002: ID 05e1:0501 Syntek Semiconductor Co., Ltd<br />
Bus 005 Device 001: ID 0000:0000<br />
...<br />
<br />
Vérifiez si l'ID (Vendor:Product) est parmi les suivantes (première colonne du tableau) : <br><br />
{| border="1"<br />
!USB ID !!Modèles !!Description / Spécifications !!Compatibilité <br />
|- <br />
|05e1:0501 ||Asus F2F, F2J, F3J, F3T, G1, Z53JA ||Chipset DC-1125 semblable à 174f:a311 || Oui <br />
|-<br />
|174f:a311 ||Asus A3A, A6J, A6K, A6M, A6R, A6T, A6V, A7T, A7sv, A7U ||Chipset STK-1125, 1.3MPixels, USB 2 || Oui <br />
|-<br />
|174f:a312 || || || Oui <br />
|-<br />
|174f:a821 ||Packard Bell BU45, PB Easynote MX66-208W ||Chipset STK-1135 || Oui <br />
|-<br />
|174f:aa11 || || || Non <br />
|-<br />
|174f:5a35 ||Asus G1s ||1.3MPixels || Oui <br />
|-<br />
|174f:6a31 ||Asus A8J,F3S, F5R, VX2S, V1S || || Oui <br />
|-<br />
|174f:6a33 ||Asus F3SA, F9J, F9S ||Semblable à 174f:6a31 || Oui <br />
|-<br />
|174f:6a51 ||Asus Z96J, Z96S, S96S ||2.0MPixels,USB 2 || Oui <br />
|-<br />
|174F:6a54 || || || Oui <br />
|-<br />
|174F:6d51 ||Eurocom D900C ||2.0MPixels, USB2.0 || Non (pas reconnue) <br />
|-<br />
||A compléter... || ||<br />
|}<br />
<br />
<br />
== Pré-requis ==<br />
* Une webcam Syntek !<br />
* Les sources du noyau qui correspondent à votre noyau<br />
* Les outils classiques pour compiler <br />
* SVN pour récupérer la toute dernière version<br />
* le paquetage <tt>ctags</tt><br />
<br />
<br />
<br />
== Installation ==<br />
Le driver est désormais disponible dans les dépôts de openSUSE. Il suffit de rajouter le dépôt : http://download.opensuse.org/repositories/drivers:/webcam/openSUSE_10.3/ et d'installer le paquetage <tt>stk11xx</tt><br />
Donc plus besoin de compiler le noyau, en revanche la configuration reste valable<br />
<br />
==== Télécharger les sources du noyau ====<br />
<br />
A partir de votre gestionnaire de paquetage (yast --> logiciels --> installer et supprimer des logiciels, smart,...) faire une recherche dans le nom : <tt>kernel</tt> puis installer <tt>kernel-source</tt><br />
{{warning|Faites attention à prendre la même version que votre noyau (kernel)}}<br />
<br />
==== Télécharger les paquetages nécessaires ====<br />
<br />
Toujours dans le gestionnaire de paquetages rechercher et installer <tt>ctags</tt>, <tt>make</tt>, <tt>subversion</tt> (SVN)<br />
<br />
==== Télécharger les sources du driver ====<br />
<br />
A partir de SVN (Ouvrez un terminal et copier/coller les 3 premières lignes sans le $, les lignes sans le $ sont le résultats de la commande)<br />
$ mkdir syntek<br />
<br />
$ cd syntek<br />
<br />
$ svn co https://syntekdriver.svn.sourceforge.net/svnroot/syntekdriver/trunk/driver<br />
driver/stk11xx-dev.c<br />
driver/Kconfig<br />
driver/stk11xx-dev-a311.c<br />
driver/stk11xx-dev.h<br />
driver/stk11xx-dev-6a31.c<br />
driver/stk11xx-dev-a821.c<br />
driver/stk11xx-dev-6a51.c<br />
driver/stk11xx-dev-6a33.c<br />
driver/stk11xx-usb.c<br />
driver/stk11xx-dev-6a54.c<br />
driver/README<br />
driver/stk11xx.txt<br />
driver/stk11xx-bayer.c<br />
driver/Makefile.standalone<br />
driver/stk11xx-v4l.c<br />
driver/stk11xx-sysfs.c<br />
driver/stk11xx.h<br />
driver/Kbuild<br />
driver/doxygen.cfg<br />
driver/Makefile<br />
driver/stk11xx-buf.c<br />
<br />
$ cd ./driver<br />
<br />
=== Compiler et installer le driver ===<br />
<br />
$ make -f Makefile.standalone<br />
$ sudo modprobe videodev<br />
$ sudo insmod stk11xx.ko<br />
remarque: si ça ne marche pas avec sudo essayer avec kdesu ou gnomesu.<br />
<br />
== Configuration ==<br />
<br />
Testé avec camorama (filtre mirror + ajustement des couleurs), kopete et amsn.<br />
<br />
<br />
Vous avez la tête à l'envers ou le teint bleuâtre, vous pouvez configurer la webcam.<br />
<br />
Soit en passant des options au chargement du driver (en cas de compilation du driver):<br />
$ sudo insmod stk11xx.ko vflip=1 brightness=0xBBBB<br />
<br />
Ou bien, ce qui revient au même, en ajoutant dans le fichier ''/etc/modprobe.d/options'':<br />
# Syntek Webcam<br />
options stk11xx vflip=1 brightness=0xBBBB<br />
<br />
Soit en utilisant les "variables système" qui se trouvent dans /sys/class/video4linux/video0 après le chargement du module:<br />
$ cat /sys/class/video4linux/video0/vflip <br />
<br />
$ echo 1 >/sys/class/video4linux/video0/vflip<br />
<br />
La liste des paramètres<br />
{| border="1"<br />
!Paramètres !!Valeurs !!Description <br />
|-<br />
|brightness || 0x0000 - 0xFFFF ||Luminosité <br />
|-<br />
|contrast || 0x0000 - 0xFFFF ||Contraste <br />
|-<br />
|whitebalance || 0x0000 - 0xFFFF ||Balances de blancs <br />
|-<br />
|colour || 0x0000 - 0xFFFF ||Couleur <br />
|-<br />
|hflip || 0 - 1 ||Mirroir horizontal (Droite-Gauche) <br />
|-<br />
|vflip || 0 - 1 ||Mirroir vertical (Haut-bas)<br />
|}<br />
<br />
== Liens ==<br />
* Pour signaler un problème, une découverte: voir dans le [[http://sourceforge.net/forum/?group_id=178178 forum SourceForge]]<br />
* Pour aider les développeurs du driver: [[http://syntekdriver.sourceforge.net/index.php?mode=help_us Help us]]<br />
* Le site du constructeur [[http://www.stk.com.tw/product-01.asp?Product_Type=32 Syntek Semi-conducteurs]]<br />
<br />
<br />
------------<br />
[[Utilisateur:Gomiz|Gomiz]] 6 avr 2008 à 18:19 (UTC)</div>Gomizhttps://fr.opensuse.org/index.php?title=Syntek&diff=7980Syntek2008-04-13T11:10:04Z<p>Gomiz : /* Installation */</p>
<hr />
<div>[[Catégorie:Documentation]]<br />
<!--documentation tirée de http://doc.ubuntu-fr.org/syntek et http://www.alionet.org--><br />
{{Intro-frame|Sont regroupées ici, les informations sur les webcams à base de chipset Syntek.<br><br />
Un driver est cours de développement : [http://syntekdriver.sourceforge.net syntekdriver.sourceforge.net] Ce driver nécessite un Kernel 2.6.20 ou plus.<br />
Le driver est désormais disponible dans les dépôts de openSUSE. Il suffit de rajouter le dépôt : http://download.opensuse.org/repositories/drivers:/webcam/openSUSE_10.3/ et d'installer le paquetage <tt>stk11xx</tt>}}<br />
<br />
<br />
__TOC__<br />
<br />
== Compatibilité ==<br />
De nombreux portables Asus et Packard Bell intègrent une webcam de ce type. Pour savoir si vous êtes dans ce cas, faites un ''lsusb'' et cherchez un périphérique dont l'identifiant commence par **05e1**:???? (Syntek Semiconductor Co., Ltd) ou **174f**:???? (Syntek Semicon.), comme ci-dessous: <br><br />
$ lsusb<br />
Bus 005 Device 002: ID 05e1:0501 Syntek Semiconductor Co., Ltd<br />
Bus 005 Device 001: ID 0000:0000<br />
...<br />
<br />
Vérifiez si l'ID (Vendor:Product) est parmi les suivantes (première colonne du tableau) : <br><br />
{| border="1"<br />
!USB ID !!Modèles !!Description / Spécifications !!Compatibilité <br />
|- <br />
|05e1:0501 ||Asus F2F, F2J, F3J, F3T, G1, Z53JA ||Chipset DC-1125 semblable à 174f:a311 || Oui <br />
|-<br />
|174f:a311 ||Asus A3A, A6J, A6K, A6M, A6R, A6T, A6V, A7T, A7sv, A7U ||Chipset STK-1125, 1.3MPixels, USB 2 || Oui <br />
|-<br />
|174f:a312 || || || Oui <br />
|-<br />
|174f:a821 ||Packard Bell BU45, PB Easynote MX66-208W ||Chipset STK-1135 || Oui <br />
|-<br />
|174f:aa11 || || || Non <br />
|-<br />
|174f:5a35 ||Asus G1s ||1.3MPixels || Oui <br />
|-<br />
|174f:6a31 ||Asus A8J,F3S, F5R, VX2S, V1S || || Oui <br />
|-<br />
|174f:6a33 ||Asus F3SA, F9J, F9S ||Semblable à 174f:6a31 || Oui <br />
|-<br />
|174f:6a51 ||Asus Z96J, Z96S, S96S ||2.0MPixels,USB 2 || Oui <br />
|-<br />
|174F:6a54 || || || Oui <br />
|-<br />
|174F:6d51 ||Eurocom D900C ||2.0MPixels, USB2.0 || Non (pas reconnue) <br />
|-<br />
||A compléter... || ||<br />
|}<br />
<br />
<br />
== Pré-requis ==<br />
* Une webcam Syntek !<br />
* Les sources du noyau qui correspondent à votre noyau<br />
* Les outils classiques pour compiler <br />
* SVN pour récupérer la toute dernière version<br />
* le paquetage <tt>ctags</tt><br />
<br />
<br />
<br />
== Installation ==<br />
Le driver est désormais disponible dans les dépôts de openSUSE. Il suffit de rajouter le dépôt : http://download.opensuse.org/repositories/drivers:/webcam/openSUSE_10.3/ et d'installer le paquetage <tt>stk11xx</tt><br />
Donc plus besoin de compiler le noyau, en revanche la configuration reste valable<br />
<br />
==== Télécharger les sources du noyau ====<br />
<br />
A partir de votre gestionnaire de paquetage (yast --> logiciels --> installer et supprimer des logiciels, smart,...) faire une recherche dans le nom : <tt>kernel</tt> puis installer <tt>kernel-source</tt><br />
{{warning|Faites attention à prendre la même version que votre noyau (kernel)}}<br />
<br />
==== Télécharger les paquetages nécessaires ====<br />
<br />
Toujours dans le gestionnaire de paquetages rechercher et installer <tt>ctags</tt>, <tt>make</tt>, <tt>subversion</tt> (SVN)<br />
<br />
==== Télécharger les sources du driver ====<br />
<br />
A partir de SVN (Ouvrez un terminal et copier/coller les 3 premières lignes sans le $, les lignes sans le $ sont le résultats de la commande)<br />
$ mkdir syntek<br />
<br />
$ cd syntek<br />
<br />
$ svn co https://syntekdriver.svn.sourceforge.net/svnroot/syntekdriver/trunk/driver<br />
driver/stk11xx-dev.c<br />
driver/Kconfig<br />
driver/stk11xx-dev-a311.c<br />
driver/stk11xx-dev.h<br />
driver/stk11xx-dev-6a31.c<br />
driver/stk11xx-dev-a821.c<br />
driver/stk11xx-dev-6a51.c<br />
driver/stk11xx-dev-6a33.c<br />
driver/stk11xx-usb.c<br />
driver/stk11xx-dev-6a54.c<br />
driver/README<br />
driver/stk11xx.txt<br />
driver/stk11xx-bayer.c<br />
driver/Makefile.standalone<br />
driver/stk11xx-v4l.c<br />
driver/stk11xx-sysfs.c<br />
driver/stk11xx.h<br />
driver/Kbuild<br />
driver/doxygen.cfg<br />
driver/Makefile<br />
driver/stk11xx-buf.c<br />
<br />
$ cd ./driver<br />
<br />
=== Compiler et installer le driver ===<br />
<br />
$ make -f Makefile.standalone<br />
$ sudo modprobe videodev<br />
$ sudo insmod stk11xx.ko<br />
remarque: si ça ne marche pas avec sudo essayer avec kdesu ou gnomesu.<br />
<br />
== Configuration ==<br />
<br />
Testé avec kopete, amsn et camorama (filtre mirror + ajustement des couleurs).<br />
<br />
<br />
Vous avez la tête à l'envers ou le teint bleuâtre, vous pouvez configurer la webcam.<br />
<br />
Soit en passant des options au chargement du driver:<br />
$ sudo insmod stk11xx.ko vflip=1 brightness=0xBBBB<br />
<br />
Ou bien, ce qui revient au même, en ajoutant dans le fichier ''/etc/modprobe.d/options'':<br />
# Syntek Webcam<br />
options stk11xx vflip=1 brightness=0xBBBB<br />
<br />
Soit en utilisant les "variables système" qui se trouvent dans /sys/class/video4linux/video0 après le chargement du module:<br />
$ cat /sys/class/video4linux/video0/vflip <br />
<br />
$ echo 1 >/sys/class/video4linux/video0/vflip<br />
<br />
La liste des paramètres<br />
{| border="1"<br />
!Paramètres !!Valeurs !!Description <br />
|-<br />
|brightness || 0x0000 - 0xFFFF ||Luminosité <br />
|-<br />
|contrast || 0x0000 - 0xFFFF ||Contraste <br />
|-<br />
|whitebalance || 0x0000 - 0xFFFF ||Balances de blancs <br />
|-<br />
|colour || 0x0000 - 0xFFFF ||Couleur <br />
|-<br />
|hflip || 0 - 1 ||Mirroir horizontal (Droite-Gauche) <br />
|-<br />
|vflip || 0 - 1 ||Mirroir vertical (Haut-bas)<br />
|}<br />
<br />
<br />
== Liens ==<br />
* Pour signaler un problème, une découverte: voir dans le [[http://sourceforge.net/forum/?group_id=178178 forum SourceForge]]<br />
* Pour aider les développeurs du driver: [[http://syntekdriver.sourceforge.net/index.php?mode=help_us Help us]]<br />
* Le site du constructeur [[http://www.stk.com.tw/product-01.asp?Product_Type=32 Syntek Semi-conducteurs]]<br />
<br />
<br />
------------<br />
[[Utilisateur:Gomiz|Gomiz]] 6 avr 2008 à 18:19 (UTC)</div>Gomizhttps://fr.opensuse.org/index.php?title=Syntek&diff=7969Syntek2008-04-07T15:34:45Z<p>Gomiz : driver dispo ds les dépôts</p>
<hr />
<div>[[Catégorie:Documentation]]<br />
<!--documentation tirée de http://doc.ubuntu-fr.org/syntek et http://www.alionet.org--><br />
{{Intro-frame|Sont regroupées ici, les informations sur les webcams à base de chipset Syntek.<br><br />
Un driver est cours de développement : [http://syntekdriver.sourceforge.net syntekdriver.sourceforge.net] Ce driver nécessite un Kernel 2.6.20 ou plus.<br />
Le driver est désormais disponible dans les dépôts de openSUSE. Il suffit de rajouter le dépôt : http://download.opensuse.org/repositories/drivers:/webcam/openSUSE_10.3/ et d'installer le paquetage <tt>stk11xx</tt>}}<br />
<br />
<br />
__TOC__<br />
<br />
== Compatibilité ==<br />
De nombreux portables Asus et Packard Bell intègrent une webcam de ce type. Pour savoir si vous êtes dans ce cas, faites un ''lsusb'' et cherchez un périphérique dont l'identifiant commence par **05e1**:???? (Syntek Semiconductor Co., Ltd) ou **174f**:???? (Syntek Semicon.), comme ci-dessous: <br><br />
$ lsusb<br />
Bus 005 Device 002: ID 05e1:0501 Syntek Semiconductor Co., Ltd<br />
Bus 005 Device 001: ID 0000:0000<br />
...<br />
<br />
Vérifiez si l'ID (Vendor:Product) est parmi les suivantes (première colonne du tableau) : <br><br />
{| border="1"<br />
!USB ID !!Modèles !!Description / Spécifications !!Compatibilité <br />
|- <br />
|05e1:0501 ||Asus F2F, F2J, F3J, F3T, G1, Z53JA ||Chipset DC-1125 semblable à 174f:a311 || Oui <br />
|-<br />
|174f:a311 ||Asus A3A, A6J, A6K, A6M, A6R, A6T, A6V, A7T, A7sv, A7U ||Chipset STK-1125, 1.3MPixels, USB 2 || Oui <br />
|-<br />
|174f:a312 || || || Oui <br />
|-<br />
|174f:a821 ||Packard Bell BU45, PB Easynote MX66-208W ||Chipset STK-1135 || Oui <br />
|-<br />
|174f:aa11 || || || Non <br />
|-<br />
|174f:5a35 ||Asus G1s ||1.3MPixels || Oui <br />
|-<br />
|174f:6a31 ||Asus A8J,F3S, F5R, VX2S, V1S || || Oui <br />
|-<br />
|174f:6a33 ||Asus F3SA, F9J, F9S ||Semblable à 174f:6a31 || Oui <br />
|-<br />
|174f:6a51 ||Asus Z96J, Z96S, S96S ||2.0MPixels,USB 2 || Oui <br />
|-<br />
|174F:6a54 || || || Oui <br />
|-<br />
|174F:6d51 ||Eurocom D900C ||2.0MPixels, USB2.0 || Non (pas reconnue) <br />
|-<br />
||A compléter... || ||<br />
|}<br />
<br />
<br />
== Pré-requis ==<br />
* Une webcam Syntek !<br />
* Les sources du noyau qui correspondent à votre noyau<br />
* Les outils classiques pour compiler <br />
* SVN pour récupérer la toute dernière version<br />
* le paquetage <tt>ctags</tt><br />
<br />
<br />
<br />
== Installation ==<br />
Le driver est désormais disponible dans les dépôts de openSUSE. Il suffit de rajouter le dépôt : http://download.opensuse.org/repositories/drivers:/webcam/openSUSE_10.3/ et d'installer le paquetage <tt>stk11xx</tt><br />
<br />
==== Télécharger les sources du noyau ====<br />
<br />
A partir de votre gestionnaire de paquetage (yast --> logiciels --> installer et supprimer des logiciels, smart,...) faire une recherche dans le nom : <tt>kernel</tt> puis installer <tt>kernel-source</tt><br />
{{warning|Faites attention à prendre la même version que votre noyau (kernel)}}<br />
<br />
==== Télécharger les paquetages nécessaires ====<br />
<br />
Toujours dans le gestionnaire de paquetages rechercher et installer <tt>ctags</tt>, <tt>make</tt>, <tt>subversion</tt> (SVN)<br />
<br />
==== Télécharger les sources du driver ====<br />
<br />
A partir de SVN (Ouvrez un terminal et copier/coller les 3 premières lignes sans le $, les lignes sans le $ sont le résultats de la commande)<br />
$ mkdir syntek<br />
<br />
$ cd syntek<br />
<br />
$ svn co https://syntekdriver.svn.sourceforge.net/svnroot/syntekdriver/trunk/driver<br />
driver/stk11xx-dev.c<br />
driver/Kconfig<br />
driver/stk11xx-dev-a311.c<br />
driver/stk11xx-dev.h<br />
driver/stk11xx-dev-6a31.c<br />
driver/stk11xx-dev-a821.c<br />
driver/stk11xx-dev-6a51.c<br />
driver/stk11xx-dev-6a33.c<br />
driver/stk11xx-usb.c<br />
driver/stk11xx-dev-6a54.c<br />
driver/README<br />
driver/stk11xx.txt<br />
driver/stk11xx-bayer.c<br />
driver/Makefile.standalone<br />
driver/stk11xx-v4l.c<br />
driver/stk11xx-sysfs.c<br />
driver/stk11xx.h<br />
driver/Kbuild<br />
driver/doxygen.cfg<br />
driver/Makefile<br />
driver/stk11xx-buf.c<br />
<br />
$ cd ./driver<br />
<br />
=== Compiler et installer le driver ===<br />
<br />
$ make -f Makefile.standalone<br />
$ sudo modprobe videodev<br />
$ sudo insmod stk11xx.ko<br />
remarque: si ça ne marche pas avec sudo essayer avec kdesu ou gnomesu.<br />
<br />
== Configuration ==<br />
<br />
Testé avec kopete, amsn et camorama (filtre mirror + ajustement des couleurs).<br />
<br />
<br />
Vous avez la tête à l'envers ou le teint bleuâtre, vous pouvez configurer la webcam.<br />
<br />
Soit en passant des options au chargement du driver:<br />
$ sudo insmod stk11xx.ko vflip=1 brightness=0xBBBB<br />
<br />
Ou bien, ce qui revient au même, en ajoutant dans le fichier ''/etc/modprobe.d/options'':<br />
# Syntek Webcam<br />
options stk11xx vflip=1 brightness=0xBBBB<br />
<br />
Soit en utilisant les "variables système" qui se trouvent dans /sys/class/video4linux/video0 après le chargement du module:<br />
$ cat /sys/class/video4linux/video0/vflip <br />
<br />
$ echo 1 >/sys/class/video4linux/video0/vflip<br />
<br />
La liste des paramètres<br />
{| border="1"<br />
!Paramètres !!Valeurs !!Description <br />
|-<br />
|brightness || 0x0000 - 0xFFFF ||Luminosité <br />
|-<br />
|contrast || 0x0000 - 0xFFFF ||Contraste <br />
|-<br />
|whitebalance || 0x0000 - 0xFFFF ||Balances de blancs <br />
|-<br />
|colour || 0x0000 - 0xFFFF ||Couleur <br />
|-<br />
|hflip || 0 - 1 ||Mirroir horizontal (Droite-Gauche) <br />
|-<br />
|vflip || 0 - 1 ||Mirroir vertical (Haut-bas)<br />
|}<br />
<br />
<br />
== Liens ==<br />
* Pour signaler un problème, une découverte: voir dans le [[http://sourceforge.net/forum/?group_id=178178 forum SourceForge]]<br />
* Pour aider les développeurs du driver: [[http://syntekdriver.sourceforge.net/index.php?mode=help_us Help us]]<br />
* Le site du constructeur [[http://www.stk.com.tw/product-01.asp?Product_Type=32 Syntek Semi-conducteurs]]<br />
<br />
<br />
------------<br />
[[Utilisateur:Gomiz|Gomiz]] 6 avr 2008 à 18:19 (UTC)</div>Gomizhttps://fr.opensuse.org/index.php?title=Syntek&diff=7968Syntek2008-04-07T14:15:24Z<p>Gomiz : /* Compiler et installer le driver */</p>
<hr />
<div>[[Catégorie:Documentation]]<br />
<!--documentation tirée de http://doc.ubuntu-fr.org/syntek et http://www.alionet.org--><br />
{{Intro-frame|Sont regroupées ici, les informations sur les webcams à base de chipset Syntek.<br><br />
Un driver est cours de développement : [http://syntekdriver.sourceforge.net syntekdriver.sourceforge.net] Ce driver nécessite un Kernel 2.6.20 ou plus.}}<br />
<br />
<br />
__TOC__<br />
<br />
== Compatibilité ==<br />
De nombreux portables Asus et Packard Bell intègrent une webcam de ce type. Pour savoir si vous êtes dans ce cas, faites un ''lsusb'' et cherchez un périphérique dont l'identifiant commence par **05e1**:???? (Syntek Semiconductor Co., Ltd) ou **174f**:???? (Syntek Semicon.), comme ci-dessous: <br><br />
$ lsusb<br />
Bus 005 Device 002: ID 05e1:0501 Syntek Semiconductor Co., Ltd<br />
Bus 005 Device 001: ID 0000:0000<br />
...<br />
<br />
Vérifiez si l'ID (Vendor:Product) est parmi les suivantes (première colonne du tableau) : <br><br />
{| border="1"<br />
!USB ID !!Modèles !!Description / Spécifications !!Compatibilité <br />
|- <br />
|05e1:0501 ||Asus F2F, F2J, F3J, F3T, G1, Z53JA ||Chipset DC-1125 semblable à 174f:a311 || Oui <br />
|-<br />
|174f:a311 ||Asus A3A, A6J, A6K, A6M, A6R, A6T, A6V, A7T, A7sv, A7U ||Chipset STK-1125, 1.3MPixels, USB 2 || Oui <br />
|-<br />
|174f:a312 || || || Oui <br />
|-<br />
|174f:a821 ||Packard Bell BU45, PB Easynote MX66-208W ||Chipset STK-1135 || Oui <br />
|-<br />
|174f:aa11 || || || Non <br />
|-<br />
|174f:5a35 ||Asus G1s ||1.3MPixels || Oui <br />
|-<br />
|174f:6a31 ||Asus A8J,F3S, F5R, VX2S, V1S || || Oui <br />
|-<br />
|174f:6a33 ||Asus F3SA, F9J, F9S ||Semblable à 174f:6a31 || Oui <br />
|-<br />
|174f:6a51 ||Asus Z96J, Z96S, S96S ||2.0MPixels,USB 2 || Oui <br />
|-<br />
|174F:6a54 || || || Oui <br />
|-<br />
|174F:6d51 ||Eurocom D900C ||2.0MPixels, USB2.0 || Non (pas reconnue) <br />
|-<br />
||A compléter... || ||<br />
|}<br />
<br />
<br />
== Pré-requis ==<br />
* Une webcam Syntek !<br />
* Les sources du noyau qui correspondent à votre noyau<br />
* Les outils classiques pour compiler <br />
* SVN pour récupérer la toute dernière version<br />
* le paquetage <tt>ctags</tt><br />
<br />
<br />
<br />
== Installation ==<br />
<br />
==== Télécharger les sources du noyau ====<br />
<br />
A partir de votre gestionnaire de paquetage (yast --> logiciels --> installer et supprimer des logiciels, smart,...) faire une recherche dans le nom : <tt>kernel</tt> puis installer <tt>kernel-source</tt><br />
{{warning|Faites attention à prendre la même version que votre noyau (kernel)}}<br />
<br />
==== Télécharger les paquetages nécessaires ====<br />
<br />
Toujours dans le gestionnaire de paquetages rechercher et installer <tt>ctags</tt>, <tt>make</tt>, <tt>subversion</tt> (SVN)<br />
<br />
==== Télécharger les sources du driver ====<br />
<br />
A partir de SVN (Ouvrez un terminal et copier/coller les 3 premières lignes sans le $, les lignes sans le $ sont le résultats de la commande)<br />
$ mkdir syntek<br />
<br />
$ cd syntek<br />
<br />
$ svn co https://syntekdriver.svn.sourceforge.net/svnroot/syntekdriver/trunk/driver<br />
driver/stk11xx-dev.c<br />
driver/Kconfig<br />
driver/stk11xx-dev-a311.c<br />
driver/stk11xx-dev.h<br />
driver/stk11xx-dev-6a31.c<br />
driver/stk11xx-dev-a821.c<br />
driver/stk11xx-dev-6a51.c<br />
driver/stk11xx-dev-6a33.c<br />
driver/stk11xx-usb.c<br />
driver/stk11xx-dev-6a54.c<br />
driver/README<br />
driver/stk11xx.txt<br />
driver/stk11xx-bayer.c<br />
driver/Makefile.standalone<br />
driver/stk11xx-v4l.c<br />
driver/stk11xx-sysfs.c<br />
driver/stk11xx.h<br />
driver/Kbuild<br />
driver/doxygen.cfg<br />
driver/Makefile<br />
driver/stk11xx-buf.c<br />
<br />
$ cd ./driver<br />
<br />
=== Compiler et installer le driver ===<br />
<br />
$ make -f Makefile.standalone<br />
$ sudo modprobe videodev<br />
$ sudo insmod stk11xx.ko<br />
remarque: si ça ne marche pas avec sudo essayer avec kdesu ou gnomesu.<br />
<br />
== Configuration ==<br />
<br />
Testé avec kopete, amsn et camorama (filtre mirror + ajustement des couleurs).<br />
<br />
<br />
Vous avez la tête à l'envers ou le teint bleuâtre, vous pouvez configurer la webcam.<br />
<br />
Soit en passant des options au chargement du driver:<br />
$ sudo insmod stk11xx.ko vflip=1 brightness=0xBBBB<br />
<br />
Ou bien, ce qui revient au même, en ajoutant dans le fichier ''/etc/modprobe.d/options'':<br />
# Syntek Webcam<br />
options stk11xx vflip=1 brightness=0xBBBB<br />
<br />
Soit en utilisant les "variables système" qui se trouvent dans /sys/class/video4linux/video0 après le chargement du module:<br />
$ cat /sys/class/video4linux/video0/vflip <br />
<br />
$ echo 1 >/sys/class/video4linux/video0/vflip<br />
<br />
La liste des paramètres<br />
{| border="1"<br />
!Paramètres !!Valeurs !!Description <br />
|-<br />
|brightness || 0x0000 - 0xFFFF ||Luminosité <br />
|-<br />
|contrast || 0x0000 - 0xFFFF ||Contraste <br />
|-<br />
|whitebalance || 0x0000 - 0xFFFF ||Balances de blancs <br />
|-<br />
|colour || 0x0000 - 0xFFFF ||Couleur <br />
|-<br />
|hflip || 0 - 1 ||Mirroir horizontal (Droite-Gauche) <br />
|-<br />
|vflip || 0 - 1 ||Mirroir vertical (Haut-bas)<br />
|}<br />
<br />
<br />
== Liens ==<br />
* Pour signaler un problème, une découverte: voir dans le [[http://sourceforge.net/forum/?group_id=178178 forum SourceForge]]<br />
* Pour aider les développeurs du driver: [[http://syntekdriver.sourceforge.net/index.php?mode=help_us Help us]]<br />
* Le site du constructeur [[http://www.stk.com.tw/product-01.asp?Product_Type=32 Syntek Semi-conducteurs]]<br />
<br />
<br />
------------<br />
[[Utilisateur:Gomiz|Gomiz]] 6 avr 2008 à 18:19 (UTC)</div>Gomizhttps://fr.opensuse.org/index.php?title=Syntek&diff=7967Syntek2008-04-07T14:04:16Z<p>Gomiz : /* Télécharger les sources du driver */</p>
<hr />
<div>[[Catégorie:Documentation]]<br />
<!--documentation tirée de http://doc.ubuntu-fr.org/syntek et http://www.alionet.org--><br />
{{Intro-frame|Sont regroupées ici, les informations sur les webcams à base de chipset Syntek.<br><br />
Un driver est cours de développement : [http://syntekdriver.sourceforge.net syntekdriver.sourceforge.net] Ce driver nécessite un Kernel 2.6.20 ou plus.}}<br />
<br />
<br />
__TOC__<br />
<br />
== Compatibilité ==<br />
De nombreux portables Asus et Packard Bell intègrent une webcam de ce type. Pour savoir si vous êtes dans ce cas, faites un ''lsusb'' et cherchez un périphérique dont l'identifiant commence par **05e1**:???? (Syntek Semiconductor Co., Ltd) ou **174f**:???? (Syntek Semicon.), comme ci-dessous: <br><br />
$ lsusb<br />
Bus 005 Device 002: ID 05e1:0501 Syntek Semiconductor Co., Ltd<br />
Bus 005 Device 001: ID 0000:0000<br />
...<br />
<br />
Vérifiez si l'ID (Vendor:Product) est parmi les suivantes (première colonne du tableau) : <br><br />
{| border="1"<br />
!USB ID !!Modèles !!Description / Spécifications !!Compatibilité <br />
|- <br />
|05e1:0501 ||Asus F2F, F2J, F3J, F3T, G1, Z53JA ||Chipset DC-1125 semblable à 174f:a311 || Oui <br />
|-<br />
|174f:a311 ||Asus A3A, A6J, A6K, A6M, A6R, A6T, A6V, A7T, A7sv, A7U ||Chipset STK-1125, 1.3MPixels, USB 2 || Oui <br />
|-<br />
|174f:a312 || || || Oui <br />
|-<br />
|174f:a821 ||Packard Bell BU45, PB Easynote MX66-208W ||Chipset STK-1135 || Oui <br />
|-<br />
|174f:aa11 || || || Non <br />
|-<br />
|174f:5a35 ||Asus G1s ||1.3MPixels || Oui <br />
|-<br />
|174f:6a31 ||Asus A8J,F3S, F5R, VX2S, V1S || || Oui <br />
|-<br />
|174f:6a33 ||Asus F3SA, F9J, F9S ||Semblable à 174f:6a31 || Oui <br />
|-<br />
|174f:6a51 ||Asus Z96J, Z96S, S96S ||2.0MPixels,USB 2 || Oui <br />
|-<br />
|174F:6a54 || || || Oui <br />
|-<br />
|174F:6d51 ||Eurocom D900C ||2.0MPixels, USB2.0 || Non (pas reconnue) <br />
|-<br />
||A compléter... || ||<br />
|}<br />
<br />
<br />
== Pré-requis ==<br />
* Une webcam Syntek !<br />
* Les sources du noyau qui correspondent à votre noyau<br />
* Les outils classiques pour compiler <br />
* SVN pour récupérer la toute dernière version<br />
* le paquetage <tt>ctags</tt><br />
<br />
<br />
<br />
== Installation ==<br />
<br />
==== Télécharger les sources du noyau ====<br />
<br />
A partir de votre gestionnaire de paquetage (yast --> logiciels --> installer et supprimer des logiciels, smart,...) faire une recherche dans le nom : <tt>kernel</tt> puis installer <tt>kernel-source</tt><br />
{{warning|Faites attention à prendre la même version que votre noyau (kernel)}}<br />
<br />
==== Télécharger les paquetages nécessaires ====<br />
<br />
Toujours dans le gestionnaire de paquetages rechercher et installer <tt>ctags</tt>, <tt>make</tt>, <tt>subversion</tt> (SVN)<br />
<br />
==== Télécharger les sources du driver ====<br />
<br />
A partir de SVN (Ouvrez un terminal et copier/coller les 3 premières lignes sans le $, les lignes sans le $ sont le résultats de la commande)<br />
$ mkdir syntek<br />
<br />
$ cd syntek<br />
<br />
$ svn co https://syntekdriver.svn.sourceforge.net/svnroot/syntekdriver/trunk/driver<br />
driver/stk11xx-dev.c<br />
driver/Kconfig<br />
driver/stk11xx-dev-a311.c<br />
driver/stk11xx-dev.h<br />
driver/stk11xx-dev-6a31.c<br />
driver/stk11xx-dev-a821.c<br />
driver/stk11xx-dev-6a51.c<br />
driver/stk11xx-dev-6a33.c<br />
driver/stk11xx-usb.c<br />
driver/stk11xx-dev-6a54.c<br />
driver/README<br />
driver/stk11xx.txt<br />
driver/stk11xx-bayer.c<br />
driver/Makefile.standalone<br />
driver/stk11xx-v4l.c<br />
driver/stk11xx-sysfs.c<br />
driver/stk11xx.h<br />
driver/Kbuild<br />
driver/doxygen.cfg<br />
driver/Makefile<br />
driver/stk11xx-buf.c<br />
<br />
$ cd ./driver<br />
<br />
=== Compiler et installer le driver ===<br />
<br />
$ make -f Makefile.standalone<br />
$ sudo modprobe videodev<br />
$ sudo insmod stk11xx.ko<br />
<br />
== Configuration ==<br />
<br />
Testé avec kopete, amsn et camorama (filtre mirror + ajustement des couleurs).<br />
<br />
<br />
Vous avez la tête à l'envers ou le teint bleuâtre, vous pouvez configurer la webcam.<br />
<br />
Soit en passant des options au chargement du driver:<br />
$ sudo insmod stk11xx.ko vflip=1 brightness=0xBBBB<br />
<br />
Ou bien, ce qui revient au même, en ajoutant dans le fichier ''/etc/modprobe.d/options'':<br />
# Syntek Webcam<br />
options stk11xx vflip=1 brightness=0xBBBB<br />
<br />
Soit en utilisant les "variables système" qui se trouvent dans /sys/class/video4linux/video0 après le chargement du module:<br />
$ cat /sys/class/video4linux/video0/vflip <br />
<br />
$ echo 1 >/sys/class/video4linux/video0/vflip<br />
<br />
La liste des paramètres<br />
{| border="1"<br />
!Paramètres !!Valeurs !!Description <br />
|-<br />
|brightness || 0x0000 - 0xFFFF ||Luminosité <br />
|-<br />
|contrast || 0x0000 - 0xFFFF ||Contraste <br />
|-<br />
|whitebalance || 0x0000 - 0xFFFF ||Balances de blancs <br />
|-<br />
|colour || 0x0000 - 0xFFFF ||Couleur <br />
|-<br />
|hflip || 0 - 1 ||Mirroir horizontal (Droite-Gauche) <br />
|-<br />
|vflip || 0 - 1 ||Mirroir vertical (Haut-bas)<br />
|}<br />
<br />
<br />
== Liens ==<br />
* Pour signaler un problème, une découverte: voir dans le [[http://sourceforge.net/forum/?group_id=178178 forum SourceForge]]<br />
* Pour aider les développeurs du driver: [[http://syntekdriver.sourceforge.net/index.php?mode=help_us Help us]]<br />
* Le site du constructeur [[http://www.stk.com.tw/product-01.asp?Product_Type=32 Syntek Semi-conducteurs]]<br />
<br />
<br />
------------<br />
[[Utilisateur:Gomiz|Gomiz]] 6 avr 2008 à 18:19 (UTC)</div>Gomizhttps://fr.opensuse.org/index.php?title=Syntek&diff=7963Syntek2008-04-06T18:21:04Z<p>Gomiz : </p>
<hr />
<div>[[Catégorie:Documentation]]<br />
<!--documentation tirée de http://doc.ubuntu-fr.org/syntek et http://www.alionet.org--><br />
{{Intro-frame|Sont regroupées ici, les informations sur les webcams à base de chipset Syntek.<br><br />
Un driver est cours de développement : [http://syntekdriver.sourceforge.net syntekdriver.sourceforge.net] Ce driver nécessite un Kernel 2.6.20 ou plus.}}<br />
<br />
<br />
__TOC__<br />
<br />
== Compatibilité ==<br />
De nombreux portables Asus et Packard Bell intègrent une webcam de ce type. Pour savoir si vous êtes dans ce cas, faites un ''lsusb'' et cherchez un périphérique dont l'identifiant commence par **05e1**:???? (Syntek Semiconductor Co., Ltd) ou **174f**:???? (Syntek Semicon.), comme ci-dessous: <br><br />
$ lsusb<br />
Bus 005 Device 002: ID 05e1:0501 Syntek Semiconductor Co., Ltd<br />
Bus 005 Device 001: ID 0000:0000<br />
...<br />
<br />
Vérifiez si l'ID (Vendor:Product) est parmi les suivantes (première colonne du tableau) : <br><br />
{| border="1"<br />
!USB ID !!Modèles !!Description / Spécifications !!Compatibilité <br />
|- <br />
|05e1:0501 ||Asus F2F, F2J, F3J, F3T, G1, Z53JA ||Chipset DC-1125 semblable à 174f:a311 || Oui <br />
|-<br />
|174f:a311 ||Asus A3A, A6J, A6K, A6M, A6R, A6T, A6V, A7T, A7sv, A7U ||Chipset STK-1125, 1.3MPixels, USB 2 || Oui <br />
|-<br />
|174f:a312 || || || Oui <br />
|-<br />
|174f:a821 ||Packard Bell BU45, PB Easynote MX66-208W ||Chipset STK-1135 || Oui <br />
|-<br />
|174f:aa11 || || || Non <br />
|-<br />
|174f:5a35 ||Asus G1s ||1.3MPixels || Oui <br />
|-<br />
|174f:6a31 ||Asus A8J,F3S, F5R, VX2S, V1S || || Oui <br />
|-<br />
|174f:6a33 ||Asus F3SA, F9J, F9S ||Semblable à 174f:6a31 || Oui <br />
|-<br />
|174f:6a51 ||Asus Z96J, Z96S, S96S ||2.0MPixels,USB 2 || Oui <br />
|-<br />
|174F:6a54 || || || Oui <br />
|-<br />
|174F:6d51 ||Eurocom D900C ||2.0MPixels, USB2.0 || Non (pas reconnue) <br />
|-<br />
||A compléter... || ||<br />
|}<br />
<br />
<br />
== Pré-requis ==<br />
* Une webcam Syntek !<br />
* Les sources du noyau qui correspondent à votre noyau<br />
* Les outils classiques pour compiler <br />
* SVN pour récupérer la toute dernière version<br />
* le paquetage <tt>ctags</tt><br />
<br />
<br />
<br />
== Installation ==<br />
<br />
==== Télécharger les sources du noyau ====<br />
<br />
A partir de votre gestionnaire de paquetage (yast --> logiciels --> installer et supprimer des logiciels, smart,...) faire une recherche dans le nom : <tt>kernel</tt> puis installer <tt>kernel-source</tt><br />
{{warning|Faites attention à prendre la même version que votre noyau (kernel)}}<br />
<br />
==== Télécharger les paquetages nécessaires ====<br />
<br />
Toujours dans le gestionnaire de paquetages rechercher et installer <tt>ctags</tt>, <tt>make</tt>, <tt>subversion</tt> (SVN)<br />
<br />
==== Télécharger les sources du driver ====<br />
<br />
A partir de SVN (Ouvrez un terminal et copier/coller les 3 premières lignes sans le $, les lignes sans le $ sont le résultats de la commande)<br />
$ mkdir syntek<br />
<br />
$ cd syntek<br />
<br />
$ svn co https://syntekdriver.svn.sourceforge.net/svnroot/syntekdriver/trunk/driver<br />
driver/stk11xx-dev.c<br />
driver/Kconfig<br />
driver/stk11xx-dev-a311.c<br />
driver/stk11xx-dev.h<br />
driver/stk11xx-dev-6a31.c<br />
driver/stk11xx-dev-a821.c<br />
driver/stk11xx-dev-6a51.c<br />
driver/stk11xx-dev-6a33.c<br />
driver/stk11xx-usb.c<br />
driver/stk11xx-dev-6a54.c<br />
driver/README<br />
driver/stk11xx.txt<br />
driver/stk11xx-bayer.c<br />
driver/Makefile.standalone<br />
driver/stk11xx-v4l.c<br />
driver/stk11xx-sysfs.c<br />
driver/stk11xx.h<br />
driver/Kbuild<br />
driver/doxygen.cfg<br />
driver/Makefile<br />
driver/stk11xx-buf.c<br />
<br />
$ cd ./syntekdriver/trunk/driver<br />
<br />
=== Compiler et installer le driver ===<br />
<br />
$ make -f Makefile.standalone<br />
$ sudo modprobe videodev<br />
$ sudo insmod stk11xx.ko<br />
<br />
== Configuration ==<br />
<br />
Testé avec kopete, amsn et camorama (filtre mirror + ajustement des couleurs).<br />
<br />
<br />
Vous avez la tête à l'envers ou le teint bleuâtre, vous pouvez configurer la webcam.<br />
<br />
Soit en passant des options au chargement du driver:<br />
$ sudo insmod stk11xx.ko vflip=1 brightness=0xBBBB<br />
<br />
Ou bien, ce qui revient au même, en ajoutant dans le fichier ''/etc/modprobe.d/options'':<br />
# Syntek Webcam<br />
options stk11xx vflip=1 brightness=0xBBBB<br />
<br />
Soit en utilisant les "variables système" qui se trouvent dans /sys/class/video4linux/video0 après le chargement du module:<br />
$ cat /sys/class/video4linux/video0/vflip <br />
<br />
$ echo 1 >/sys/class/video4linux/video0/vflip<br />
<br />
La liste des paramètres<br />
{| border="1"<br />
!Paramètres !!Valeurs !!Description <br />
|-<br />
|brightness || 0x0000 - 0xFFFF ||Luminosité <br />
|-<br />
|contrast || 0x0000 - 0xFFFF ||Contraste <br />
|-<br />
|whitebalance || 0x0000 - 0xFFFF ||Balances de blancs <br />
|-<br />
|colour || 0x0000 - 0xFFFF ||Couleur <br />
|-<br />
|hflip || 0 - 1 ||Mirroir horizontal (Droite-Gauche) <br />
|-<br />
|vflip || 0 - 1 ||Mirroir vertical (Haut-bas)<br />
|}<br />
<br />
<br />
== Liens ==<br />
* Pour signaler un problème, une découverte: voir dans le [[http://sourceforge.net/forum/?group_id=178178 forum SourceForge]]<br />
* Pour aider les développeurs du driver: [[http://syntekdriver.sourceforge.net/index.php?mode=help_us Help us]]<br />
* Le site du constructeur [[http://www.stk.com.tw/product-01.asp?Product_Type=32 Syntek Semi-conducteurs]]<br />
<br />
<br />
------------<br />
[[Utilisateur:Gomiz|Gomiz]] 6 avr 2008 à 18:19 (UTC)</div>Gomizhttps://fr.opensuse.org/index.php?title=Syntek&diff=7962Syntek2008-04-06T18:19:20Z<p>Gomiz : rajout des liens</p>
<hr />
<div>[[Catégorie:Documentation]]<br />
<!--documentation tirée de http://doc.ubuntu-fr.org/syntek et http://www.alionet.org--><br />
<br />
{{Intro-frame|Sont regroupées ici, les informations sur les webcams à base de chipset Syntek.<br><br />
Un driver est cours de développement : [http://syntekdriver.sourceforge.net syntekdriver.sourceforge.net] Ce driver nécessite un Kernel 2.6.20 ou plus.}}<br />
<br />
<br />
__TOC__<br />
<br />
== Compatibilité ==<br />
De nombreux portables Asus et Packard Bell intègrent une webcam de ce type. Pour savoir si vous êtes dans ce cas, faites un ''lsusb'' et cherchez un périphérique dont l'identifiant commence par **05e1**:???? (Syntek Semiconductor Co., Ltd) ou **174f**:???? (Syntek Semicon.), comme ci-dessous: <br><br />
$ lsusb<br />
Bus 005 Device 002: ID 05e1:0501 Syntek Semiconductor Co., Ltd<br />
Bus 005 Device 001: ID 0000:0000<br />
...<br />
<br />
Vérifiez si l'ID (Vendor:Product) est parmi les suivantes (première colonne du tableau) : <br><br />
{| border="1"<br />
!USB ID !!Modèles !!Description / Spécifications !!Compatibilité <br />
|- <br />
|05e1:0501 ||Asus F2F, F2J, F3J, F3T, G1, Z53JA ||Chipset DC-1125 semblable à 174f:a311 || Oui <br />
|-<br />
|174f:a311 ||Asus A3A, A6J, A6K, A6M, A6R, A6T, A6V, A7T, A7sv, A7U ||Chipset STK-1125, 1.3MPixels, USB 2 || Oui <br />
|-<br />
|174f:a312 || || || Oui <br />
|-<br />
|174f:a821 ||Packard Bell BU45, PB Easynote MX66-208W ||Chipset STK-1135 || Oui <br />
|-<br />
|174f:aa11 || || || Non <br />
|-<br />
|174f:5a35 ||Asus G1s ||1.3MPixels || Oui <br />
|-<br />
|174f:6a31 ||Asus A8J,F3S, F5R, VX2S, V1S || || Oui <br />
|-<br />
|174f:6a33 ||Asus F3SA, F9J, F9S ||Semblable à 174f:6a31 || Oui <br />
|-<br />
|174f:6a51 ||Asus Z96J, Z96S, S96S ||2.0MPixels,USB 2 || Oui <br />
|-<br />
|174F:6a54 || || || Oui <br />
|-<br />
|174F:6d51 ||Eurocom D900C ||2.0MPixels, USB2.0 || Non (pas reconnue) <br />
|-<br />
||A compléter... || ||<br />
|}<br />
<br />
<br />
== Pré-requis ==<br />
* Une webcam Syntek !<br />
* Les sources du noyau qui correspondent à votre noyau<br />
* Les outils classiques pour compiler <br />
* SVN pour récupérer la toute dernière version<br />
* le paquetage <tt>ctags</tt><br />
<br />
<br />
<br />
== Installation ==<br />
<br />
==== Télécharger les sources du noyau ====<br />
<br />
A partir de votre gestionnaire de paquetage (yast --> logiciels --> installer et supprimer des logiciels, smart,...) faire une recherche dans le nom : <tt>kernel</tt> puis installer <tt>kernel-source</tt><br />
{{warning|Faites attention à prendre la même version que votre noyau (kernel)}}<br />
<br />
==== Télécharger les paquetages nécessaires ====<br />
<br />
Toujours dans le gestionnaire de paquetages rechercher et installer <tt>ctags</tt>, <tt>make</tt>, <tt>subversion</tt> (SVN)<br />
<br />
==== Télécharger les sources du driver ====<br />
<br />
A partir de SVN (Ouvrez un terminal et copier/coller les 3 premières lignes sans le $, les lignes sans le $ sont le résultats de la commande)<br />
$ mkdir syntek<br />
<br />
$ cd syntek<br />
<br />
$ svn co https://syntekdriver.svn.sourceforge.net/svnroot/syntekdriver/trunk/driver<br />
driver/stk11xx-dev.c<br />
driver/Kconfig<br />
driver/stk11xx-dev-a311.c<br />
driver/stk11xx-dev.h<br />
driver/stk11xx-dev-6a31.c<br />
driver/stk11xx-dev-a821.c<br />
driver/stk11xx-dev-6a51.c<br />
driver/stk11xx-dev-6a33.c<br />
driver/stk11xx-usb.c<br />
driver/stk11xx-dev-6a54.c<br />
driver/README<br />
driver/stk11xx.txt<br />
driver/stk11xx-bayer.c<br />
driver/Makefile.standalone<br />
driver/stk11xx-v4l.c<br />
driver/stk11xx-sysfs.c<br />
driver/stk11xx.h<br />
driver/Kbuild<br />
driver/doxygen.cfg<br />
driver/Makefile<br />
driver/stk11xx-buf.c<br />
<br />
$ cd ./syntekdriver/trunk/driver<br />
<br />
=== Compiler et installer le driver ===<br />
<br />
$ make -f Makefile.standalone<br />
$ sudo modprobe videodev<br />
$ sudo insmod stk11xx.ko<br />
<br />
== Configuration ==<br />
<br />
Testé avec kopete, amsn et camorama (filtre mirror + ajustement des couleurs).<br />
<br />
<br />
Vous avez la tête à l'envers ou le teint bleuâtre, vous pouvez configurer la webcam.<br />
<br />
Soit en passant des options au chargement du driver:<br />
$ sudo insmod stk11xx.ko vflip=1 brightness=0xBBBB<br />
<br />
Ou bien, ce qui revient au même, en ajoutant dans le fichier ''/etc/modprobe.d/options'':<br />
# Syntek Webcam<br />
options stk11xx vflip=1 brightness=0xBBBB<br />
<br />
Soit en utilisant les "variables système" qui se trouvent dans /sys/class/video4linux/video0 après le chargement du module:<br />
$ cat /sys/class/video4linux/video0/vflip <br />
<br />
$ echo 1 >/sys/class/video4linux/video0/vflip<br />
<br />
La liste des paramètres<br />
{| border="1"<br />
!Paramètres !!Valeurs !!Description <br />
|-<br />
|brightness || 0x0000 - 0xFFFF ||Luminosité <br />
|-<br />
|contrast || 0x0000 - 0xFFFF ||Contraste <br />
|-<br />
|whitebalance || 0x0000 - 0xFFFF ||Balances de blancs <br />
|-<br />
|colour || 0x0000 - 0xFFFF ||Couleur <br />
|-<br />
|hflip || 0 - 1 ||Mirroir horizontal (Droite-Gauche) <br />
|-<br />
|vflip || 0 - 1 ||Mirroir vertical (Haut-bas)<br />
|}<br />
<br />
<br />
== Liens ==<br />
* Pour signaler un problème, une découverte: voir dans le [[http://sourceforge.net/forum/?group_id=178178 forum SourceForge]]<br />
* Pour aider les développeurs du driver: [[http://syntekdriver.sourceforge.net/index.php?mode=help_us Help us]]<br />
* Le site du constructeur [[http://www.stk.com.tw/product-01.asp?Product_Type=32 Syntek Semi-conducteurs]]<br />
<br />
<br />
------------<br />
[[Utilisateur:Gomiz|Gomiz]] 6 avr 2008 à 18:19 (UTC)</div>Gomizhttps://fr.opensuse.org/index.php?title=Syntek&diff=7961Syntek2008-04-06T18:10:12Z<p>Gomiz : howto installation du driver de webcam à base de chipset syntek</p>
<hr />
<div>[[Catégorie:Documentation]]<br />
<!--documentation tirée de http://doc.ubuntu-fr.org/syntek et http://www.alionet.org--><br />
<br />
{{Intro-frame|Sont regroupées ici, les informations sur les webcams à base de chipset Syntek.<br><br />
Un driver est cours de développement : [http://syntekdriver.sourceforge.net syntekdriver.sourceforge.net] Ce driver nécessite un Kernel 2.6.20 ou plus.}}<br />
<br />
<br />
__TOC__<br />
<br />
== Compatibilité ==<br />
De nombreux portables Asus et Packard Bell intègrent une webcam de ce type. Pour savoir si vous êtes dans ce cas, faites un ''lsusb'' et cherchez un périphérique dont l'identifiant commence par **05e1**:???? (Syntek Semiconductor Co., Ltd) ou **174f**:???? (Syntek Semicon.), comme ci-dessous: <br><br />
$ lsusb<br />
Bus 005 Device 002: ID 05e1:0501 Syntek Semiconductor Co., Ltd<br />
Bus 005 Device 001: ID 0000:0000<br />
...<br />
<br />
Vérifiez si l'ID (Vendor:Product) est parmi les suivantes (première colonne du tableau) : <br><br />
{| border="1"<br />
!USB ID !!Modèles !!Description / Spécifications !!Compatibilité <br />
|- <br />
|05e1:0501 ||Asus F2F, F2J, F3J, F3T, G1, Z53JA ||Chipset DC-1125 semblable à 174f:a311 || Oui <br />
|-<br />
|174f:a311 ||Asus A3A, A6J, A6K, A6M, A6R, A6T, A6V, A7T, A7sv, A7U ||Chipset STK-1125, 1.3MPixels, USB 2 || Oui <br />
|-<br />
|174f:a312 || || || Oui <br />
|-<br />
|174f:a821 ||Packard Bell BU45, PB Easynote MX66-208W ||Chipset STK-1135 || Oui <br />
|-<br />
|174f:aa11 || || || Non <br />
|-<br />
|174f:5a35 ||Asus G1s ||1.3MPixels || Oui <br />
|-<br />
|174f:6a31 ||Asus A8J,F3S, F5R, VX2S, V1S || || Oui <br />
|-<br />
|174f:6a33 ||Asus F3SA, F9J, F9S ||Semblable à 174f:6a31 || Oui <br />
|-<br />
|174f:6a51 ||Asus Z96J, Z96S, S96S ||2.0MPixels,USB 2 || Oui <br />
|-<br />
|174F:6a54 || || || Oui <br />
|-<br />
|174F:6d51 ||Eurocom D900C ||2.0MPixels, USB2.0 || Non (pas reconnue) <br />
|-<br />
||A compléter... || ||<br />
|}<br />
<br />
<br />
== Pré-requis ==<br />
* Une webcam Syntek !<br />
* Les sources du noyau qui correspondent à votre noyau<br />
* Les outils classiques pour compiler <br />
* SVN pour récupérer la toute dernière version<br />
* le paquetage <tt>ctags</tt><br />
<br />
<br />
<br />
== Installation ==<br />
<br />
==== Télécharger les sources du noyau ====<br />
<br />
A partir de votre gestionnaire de paquetage (yast --> logiciels --> installer et supprimer des logiciels, smart,...) faire une recherche dans le nom : <tt>kernel</tt> puis installer <tt>kernel-source</tt><br />
{{warning|Faites attention à prendre la même version que votre noyau (kernel)}}<br />
<br />
==== Télécharger les paquetages nécessaires ====<br />
<br />
Toujours dans le gestionnaire de paquetages rechercher et installer <tt>ctags</tt>, <tt>make</tt>, <tt>subversion</tt> (SVN)<br />
<br />
==== Télécharger les sources du driver ====<br />
<br />
A partir de SVN (Ouvrez un terminal et copier/coller les 3 premières lignes sans le $, les lignes sans le $ sont le résultats de la commande)<br />
$ mkdir syntek<br />
<br />
$ cd syntek<br />
<br />
$ svn co https://syntekdriver.svn.sourceforge.net/svnroot/syntekdriver/trunk/driver<br />
driver/stk11xx-dev.c<br />
driver/Kconfig<br />
driver/stk11xx-dev-a311.c<br />
driver/stk11xx-dev.h<br />
driver/stk11xx-dev-6a31.c<br />
driver/stk11xx-dev-a821.c<br />
driver/stk11xx-dev-6a51.c<br />
driver/stk11xx-dev-6a33.c<br />
driver/stk11xx-usb.c<br />
driver/stk11xx-dev-6a54.c<br />
driver/README<br />
driver/stk11xx.txt<br />
driver/stk11xx-bayer.c<br />
driver/Makefile.standalone<br />
driver/stk11xx-v4l.c<br />
driver/stk11xx-sysfs.c<br />
driver/stk11xx.h<br />
driver/Kbuild<br />
driver/doxygen.cfg<br />
driver/Makefile<br />
driver/stk11xx-buf.c<br />
<br />
$ cd ./syntekdriver/trunk/driver<br />
<br />
=== Compiler et installer le driver ===<br />
<br />
$ make -f Makefile.standalone<br />
$ sudo modprobe videodev<br />
$ sudo insmod stk11xx.ko<br />
<br />
== Configuration ==<br />
<br />
Testé avec kopete, amsn et camorama (filtre mirror + ajustement des couleurs).<br />
<br />
<br />
Vous avez la tête à l'envers ou le teint bleuâtre, vous pouvez configurer la webcam.<br />
<br />
Soit en passant des options au chargement du driver:<br />
$ sudo insmod stk11xx.ko vflip=1 brightness=0xBBBB<br />
<br />
Ou bien, ce qui revient au même, en ajoutant dans le fichier ''/etc/modprobe.d/options'':<br />
# Syntek Webcam<br />
options stk11xx vflip=1 brightness=0xBBBB<br />
<br />
Soit en utilisant les "variables système" qui se trouvent dans /sys/class/video4linux/video0 après le chargement du module:<br />
$ cat /sys/class/video4linux/video0/vflip <br />
<br />
$ echo 1 >/sys/class/video4linux/video0/vflip<br />
<br />
La liste des paramètres<br />
{| border="1"<br />
!Paramètres !!Valeurs !!Description <br />
|-<br />
|brightness || 0x0000 - 0xFFFF ||Luminosité <br />
|-<br />
|contrast || 0x0000 - 0xFFFF ||Contraste <br />
|-<br />
|whitebalance || 0x0000 - 0xFFFF ||Balances de blancs <br />
|-<br />
|colour || 0x0000 - 0xFFFF ||Couleur <br />
|-<br />
|hflip || 0 - 1 ||Mirroir horizontal (Droite-Gauche) <br />
|-<br />
|vflip || 0 - 1 ||Mirroir vertical (Haut-bas)<br />
|}</div>Gomizhttps://fr.opensuse.org/index.php?title=Mod%C3%A8les&diff=7960Modèles2008-04-06T17:23:38Z<p>Gomiz : j'ai changé avertissement en warning pour pouvoir faire les copier/coller</p>
<hr />
<div>[[Catégorie:Sysop]]<br />
[[Category:Ressources d'édition du wiki]]<br />
Les modèles sont utiles pour conserver un aspect uniforme dans le wiki. Si vous êtes nouveaux, vous n'êtes sans doute pas prêts à en créer, ne vous en faites pas, ils sont très faciles à utiliser. Ajoutez juste ce qui figure dans la colonne "A taper" du tableau ci-dessus et vous obtiendrez le résultat que vous pouvez voir dans la colonne "Ce que ça donne".<br />
<br />
{| border="1" cellspacing="0" cellpadding="3"<br />
|-<br />
! A taper !! Ce que ça donne !! Où l'utiliser<br />
|-<br />
|<nowiki>{{</nowiki>[[Modèle:q|q]]<nowiki>}}</nowiki><br />
| {{q}}<br />
|?<br />
|-<br />
|<nowiki>{{</nowiki>[[Modèle:N|N]]<nowiki>}}</nowiki><br />
| {{N}}<br />
|Non<br />
|-<br />
|<nowiki>{{</nowiki>[[Modèle:O|O]]<nowiki>}}</nowiki><br />
| {{O}}<br />
|Oui<br />
|-<br />
|<nowiki>{{</nowiki>[[template:IW|IW]]<nowiki>}}</nowiki><br />
| Place les liens Interwiki pour tous les wikis traduits<br />
|À mettre en bas de page<br />
|-<br />
|<nowiki>{{</nowiki>[[template:OSP|OSP]]<nowiki>}}</nowiki><br />
| {{OSP}}<br />
|Pour écrire "projet openSUSE"<br />
|-<br />
|<nowiki>{{</nowiki>[[template:CatList|CatList]]<nowiki>}}</nowiki><br />
| '''Nom de la catégorie'''<br />
:Et contenu fixe de la page<br />
|Pour la page [[Liste des catégories]]<br />
|-<br />
|<nowiki>{{</nowiki>[[template:Win|Win]]<nowiki>}}</nowiki><br />
| {{Win}}<br />
|Pour entrer le nom du collègue correctement :-)<br />
|-<br />
|<nowiki>{{</nowiki>[[template:Page précédente|Page précédente]]<nowiki>}}</nowiki><br />
| {{Page précédente|Page ou on veut revenir}}<br />
|Pour pouvoir revenir facilement à la page précédente<br />
|-<br />
|<nowiki>{{</nowiki>[[template:Table à droite|Table à droite]]<nowiki>}}</nowiki><br />
|Ne marche pas dans cette page (pas de titres :-)<br />
|En haut d'une page pour que la table des matières soit à droite<br />
|-<br />
|<nowiki>{{</nowiki>[[template:DownloadNavigation|DownloadNavigation]]<nowiki>}}</nowiki><br />
|{{DownloadNavigation}}<br />
|En haut d'une page téléchargement<br />
|-<br />
|<nowiki>{{</nowiki>[[template:Page à recomposer|Page à recomposer]]<nowiki>}}</nowiki><br />
|{{Page à recomposer}}<br />
|En haut d'une page qu'il faut recomposer<br />
|-<br />
|<nowiki>{{</nowiki>[[template:Page à relire|Page à relire]]<nowiki>}}</nowiki><br />
|{{Page à relire}}<br />
|En haut d'une page qu'il faut relire<br />
|-<br />
|<nowiki>{{</nowiki>[[template:Page à traduire|Page à traduire]]<nowiki>}}</nowiki><br />
|{{Page à traduire}}<br />
|En haut d'une page<br />
|-<br />
|<nowiki>{{</nowiki>[[template:Grosse traduction|Grosse traduction]]<nowiki>}}</nowiki><br />
|{{Grosse traduction}}<br />
|En haut d'une page<br />
|-<br />
|<nowiki>{{</nowiki>[[template:Bug de mise en page|Bug de mise en page]]<nowiki>}}</nowiki><br />
|{{Bug de mise en page}}<br />
|En haut d'une page affectée par le bug<br />
|-<br />
|<nowiki>{{</nowiki>[[template:Stats|Stats]]<nowiki>}}</nowiki><br />
|{{Stats}}<br />
|En haut d'une page<br>apparaîtra tout à droite<br />
|-<br />
<br />
<br />
| <nowiki>{{</nowiki>[[Template:Page à effacer|Page à effacer]]<nowiki>|Raison de la demande}}</nowiki><br />
|<br />
{{Page à effacer|Raison de la demande}}<br />
| Top of Article<br />
|-<br />
| <nowiki>{{</nowiki>[[Template:A compléter|A compléter]]<nowiki>}}</nowiki><br />
|<br />
{{A compléter}}<br />
| Bottom of Article<br />
|-<br />
| <nowiki>{{</nowiki>[[Template:Obsolete|Obsolete]]<nowiki>|Insérez le numéro de version ici}}</nowiki><br />
|<br />
{{Obsolete|Insérez le numéro de version ici}}<br />
| haut de l'article<br />
|-<br />
| <nowiki>{{</nowiki>[[Template:Testé sur|Testé sur]]<nowiki>|Insérez la version ici}}</nowiki><br />
|<br />
{{Testé sur|Insérez la version ici}}<br />
| haut de l'article<br />
|-<br />
| <nowiki>{{</nowiki>[[Template:Merge|Merge]]<nowiki>|Page à fusionner}}</nowiki><br />
|<br />
{{Merge|Page à fusionner}}<br />
| en haut d'un Article<br />
|-<br />
| <nowiki>{{</nowiki>[[Template:Note|Note]]<nowiki>|Ce texte apparait dans la note.}}</nowiki><br />
|<br />
{{Note|Ce texte apparait dans la note.}}<br />
| Partout<br />
|-<br />
| <nowiki>{{</nowiki>[[Template:Info|Info]]<nowiki>|Texte informatif}}</nowiki><br />
|<br />
{{Info|Texte informatif}}<br />
| Partout<br />
|-<br />
| <nowiki>{{</nowiki>[[Template:Warning|Warning]]<nowiki>|Texte d'avertissement}}</nowiki><br />
|<br />
{{Warning|Texte d'avertissement}}<br />
| Partout<br />
|-<br />
| <nowiki>{{</nowiki>[[Template:VersionNote|VersionNote]]<nowiki>|Version|Version Note}}</nowiki><br />
|<br />
{{VersionNote|10.1|Version Note}}<br />
| Partout<br />
|-<br />
| <nowiki>{{</nowiki>[[Template:command|command]]<nowiki>|Lancez la commande :<br />
commande X}}</nowiki><br />
|<br />
{{command|Lancez la commande :<br />
commande X}}<br />
| Partout<br />
|-<br />
| <nowiki>{{</nowiki>[[Template:KDE|KDE]]<nowiki>|Commande à taper}}</nowiki><br />
|<br />
{{KDE|Commande à taper}}<br />
| Partout<br />
|-<br />
| <nowiki>{{</nowiki>[[Template:GNOME|GNOME]]<nowiki>|Commande à taper}}</nowiki><br />
|<br />
{{GNOME|Commande à taper}}<br />
| Partout<br />
|-<br />
| <nowiki>{{</nowiki>[[Template:warningbox|warningbox]]<nowiki>|Texte à afficher}}</nowiki><br />
|<br />
{{warningbox|Texte à afficher}}<br />
| Partout<br />
|}<br />
<br />
<br />
<br />
{{Note|Du fait que certains des modèles de cette page appartiennent à une catégorie, cette page appartient aussi à toutes ces catégories. C'est un effet de bord du fonctionnement du wiki et peut être ignoré.}}<br />
[[en:templates]]</div>Gomizhttps://fr.opensuse.org/index.php?title=Utilisateur:Gomiz&diff=7851Utilisateur:Gomiz2008-02-26T12:50:05Z<p>Gomiz : </p>
<hr />
<div><h1><span style="color:#C37903;">Salut à tous.</span></h1><br />
Ca me fait plaisir de pouvoir participer surtout que j'adore <span style="color:#008F00;">Suse!</span> que j'ai découvert un peu par hasard.<br> <br />
n'hésitez pas à me contacter :[mailto:chaume.mickael@yahoo.fr e-mail]<br />
<br><br><br />
Je suis actuellement étudiant en école d'ingénieur à l'UTBM sur Belfort(90) en génie électrique et systèmes de commande<br />
<br><br><br />
TOEIC:765/990 <br><br />
Zertifikat Deutsch:255/300 <br />
<br><br><br />
Liens pour la création Wiki : <br><br />
----<br />
[http://fr.opensuse.org/Cat%C3%A9gorie:A_traduire Pages à traduire]<br><br />
[http://fr.opensuse.org/Liste_des_cat%C3%A9gories Liste des catégories] ex: à traduire, doc,... <br><br />
[[:Mod%C3%A8les]]<br><br />
[http://meta.wikimedia.org/wiki/Aide:Syntaxe_wiki Syntaxe Wiki] <br><br />
[http://fr.opensuse.org/Glossaire_d%27%C3%A9quivalences_entre_l%27anglais_et_le_fran%C3%A7ais Equivalence anglais technique et francais]<br><br />
[http://fr.opensuse.org/Communiquer#Forums Forums]</div>Gomizhttps://fr.opensuse.org/index.php?title=Utilisateur:Gomiz&diff=7850Utilisateur:Gomiz2008-02-25T23:23:13Z<p>Gomiz : </p>
<hr />
<div><h1><span style="color:#C37903;">Salut à tous.</span></h1><br />
Ca me fait plaisir de pouvoir participer surtout que j'adore <span style="color:#008F00;">Suse!</span> que j'ai découvert un peu par hasard.<br> <br />
n'hésitez pas à me contacter :[mailto:chaume.mickael@yahoo.fr e-mail]<br />
<br><br><br />
Je suis actuellement étudiant en école d'ingénieur à l'UTBM sur Belfort(90) en génie électrique et systèmes de commande<br />
<br><br><br />
TOEIC:765/990 <br><br />
Zertifikat Deutsch:255/300 <br />
<br><br><br />
Liens pour la création Wiki : <br><br />
----<br />
[[:Cat%C3%A9gorie:A_traduire]]<br><br />
[http://fr.opensuse.org/Liste_des_cat%C3%A9gories Liste des catégories] ex: à traduire, doc,... <br><br />
[[:Mod%C3%A8les]]<br><br />
[http://meta.wikimedia.org/wiki/Aide:Syntaxe_wiki Syntaxe Wiki] <br><br />
[http://fr.opensuse.org/Glossaire_d%27%C3%A9quivalences_entre_l%27anglais_et_le_fran%C3%A7ais Equivalence anglais technique et francais]<br><br />
[http://fr.opensuse.org/Communiquer#Forums Forums]</div>Gomizhttps://fr.opensuse.org/index.php?title=Carte_Hauppauge_HVR-1110_TV-DVB&diff=7847Carte Hauppauge HVR-1110 TV-DVB2008-02-25T23:07:03Z<p>Gomiz : Hauppauge HVR-1110 TV-DVB card déplacé vers Carte Hauppauge HVR-1110 TV-DVB</p>
<hr />
<div>{{Page à traduire}}<br />
<br />
=== How to install a Hauppauge HVR-1110 analog TV and DVB card ===<br />
<br />
The first part of this howto (building the drivers) applies to opensuse 10.2 and lower.<br />
The Hauppauge HVR-1110 is sometimes sold packaged as a HVR-1100, but while the HVR-1100 has a rectangular shape, the HVR-1110 is triangular.<br />
The HVR-1110 is not autodetected by the 2.6.18 kernel included in opensuse 10.2, although later kernels do autodetect it.<br />
So, you have two options, install a new kernel or build and install new [http://www.linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers DVB/V4L] modules, which is not straightforward in opensuse 10.2 (the build fails).<br />
<br />
=== Build new DVB/V4L drivers ===<br />
- Download the sources from [http://linuxtv.org/hg/v4l-dvb/archive/tip.tar.bz2 LinuxTV archive]<br />
<br />
- Now, before building the modules, the /lib/modules/_kernel_version_/build/include directory needs to point to the linux sources include:<br />
cd /lib/modules/_kernel_version_/build<br />
mv include include.bak<br />
ln -s /usr/src/linux/include<br />
- Untar the sources, cd to the sources directory, and build the drivers<br />
cd v4l && make && make install (as root)<br />
- If you wish you can restore the /lib/modules/_kernel_version_/build/include directory<br />
<br />
=== Install the card's firmware ===<br />
The firmware file is dvb-fe-tda10046.fw and should be copied in /lib/firmware<br />
Mandrake seems to have a suitable rpm package in their plf repository (see [http://rpm.pbone.net/index.php3/stat/4/idpl/3597774/com/dvb-firmware-frontends-20061120-1plf2007.0.noarch.rpm.html])<br />
<br />
=== Using the card ===<br />
Loading the saa7134 kernel module will load the saa7134-dvb too. To have sound the saa7134-alsa module must be loaded too.<br />
<br />
After loading the saa7134 module the keyboard may become stuck for a few seconds.<br />
<br />
The dmesg output is something like:<br />
<br />
saa7130/34: v4l2 driver version 0.2.14 loaded<br />
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10<br />
saa7133[0]: found at 0000:01:07.0, rev: 209, irq: 10, latency: 32, mmio: 0xe6000000<br />
saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]<br />
saa7133[0]: board init: gpio is 6400000<br />
input: HVR 1110 as /class/input/input3<br />
ir-kbd-i2c: HVR 1110 detected at i2c-2/2-0071/ir0 [saa7133[0]]<br />
saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92<br />
saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff<br />
saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff<br />
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br />
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff<br />
saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<br />
saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<br />
saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<br />
tuner 2-004b: chip found @ 0x96 (saa7133[0])<br />
tda8290 2-004b: setting tuner address to 61<br />
tuner 2-004b: type set to tda8290+75a<br />
saa7133[0]: registered device video0 [v4l2]<br />
saa7133[0]: registered device vbi0<br />
saa7133[0]: registered device radio0<br />
DVB: registering new adapter (saa7133[0])<br />
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...<br />
tda1004x: setting up plls for 48MHz sampling clock<br />
tda1004x: timeout waiting for DSP ready<br />
tda1004x: found firmware revision 0 -- invalid<br />
tda1004x: trying to boot from eeprom<br />
tda1004x: timeout waiting for DSP ready<br />
tda1004x: found firmware revision 0 -- invalid<br />
tda1004x: waiting for firmware upload...<br />
tda1004x: found firmware revision 20 -- ok<br />
saa7134 ALSA driver for DMA sound loaded<br />
saa7133[0]/alsa: saa7133[0] at 0xe6000000 irq 10 registered as card -1<br />
<br />
Once all needed modules have been loaded the card can be used, both analog tv/radio and dvb.<br />
If you use an analog tv app like kdetv/xdtv/tvtime, you'll have image but no sound.<br />
To have sound you'll have to redirect the sound stream from the card's alsa device to the soundcard's device using sox:<br />
sox -r 16000 -w -c 2 -t ossdsp /dev/dsp1 -t ossdsp /dev/dsp<br />
Same for analog radio.<br />
<br />
For dvb you'll use an application like kaffeine, so the 'sox' trick will not be needed.<br />
mplayer can be used for both analog tv and dvb, not needing to use sox for sound.<br />
mplayer -tv driver=v4l2:norm=PAL:chanlist=<chanlist_file>:alsa:adevice=hw.1:\<br />
audiorate=16000:immediatemode=0:forceaudio:amode=1 tv://<br />
mplayer -tv alsa:adevice=hw.1:audiorate=16000:immediatemode=0:forceaudio:amode=1 dvb://<Channel></div>Gomizhttps://fr.opensuse.org/index.php?title=Hauppauge_HVR-1110_TV-DVB_card&diff=7848Hauppauge HVR-1110 TV-DVB card2008-02-25T23:07:03Z<p>Gomiz : Hauppauge HVR-1110 TV-DVB card déplacé vers Carte Hauppauge HVR-1110 TV-DVB</p>
<hr />
<div>#redirect [[Carte Hauppauge HVR-1110 TV-DVB]]</div>Gomizhttps://fr.opensuse.org/index.php?title=Carte_Hauppauge_HVR-1110_TV-DVB&diff=7846Carte Hauppauge HVR-1110 TV-DVB2008-02-25T23:06:33Z<p>Gomiz : </p>
<hr />
<div>{{Page à traduire}}<br />
<br />
=== How to install a Hauppauge HVR-1110 analog TV and DVB card ===<br />
<br />
The first part of this howto (building the drivers) applies to opensuse 10.2 and lower.<br />
The Hauppauge HVR-1110 is sometimes sold packaged as a HVR-1100, but while the HVR-1100 has a rectangular shape, the HVR-1110 is triangular.<br />
The HVR-1110 is not autodetected by the 2.6.18 kernel included in opensuse 10.2, although later kernels do autodetect it.<br />
So, you have two options, install a new kernel or build and install new [http://www.linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers DVB/V4L] modules, which is not straightforward in opensuse 10.2 (the build fails).<br />
<br />
=== Build new DVB/V4L drivers ===<br />
- Download the sources from [http://linuxtv.org/hg/v4l-dvb/archive/tip.tar.bz2 LinuxTV archive]<br />
<br />
- Now, before building the modules, the /lib/modules/_kernel_version_/build/include directory needs to point to the linux sources include:<br />
cd /lib/modules/_kernel_version_/build<br />
mv include include.bak<br />
ln -s /usr/src/linux/include<br />
- Untar the sources, cd to the sources directory, and build the drivers<br />
cd v4l && make && make install (as root)<br />
- If you wish you can restore the /lib/modules/_kernel_version_/build/include directory<br />
<br />
=== Install the card's firmware ===<br />
The firmware file is dvb-fe-tda10046.fw and should be copied in /lib/firmware<br />
Mandrake seems to have a suitable rpm package in their plf repository (see [http://rpm.pbone.net/index.php3/stat/4/idpl/3597774/com/dvb-firmware-frontends-20061120-1plf2007.0.noarch.rpm.html])<br />
<br />
=== Using the card ===<br />
Loading the saa7134 kernel module will load the saa7134-dvb too. To have sound the saa7134-alsa module must be loaded too.<br />
<br />
After loading the saa7134 module the keyboard may become stuck for a few seconds.<br />
<br />
The dmesg output is something like:<br />
<br />
saa7130/34: v4l2 driver version 0.2.14 loaded<br />
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10<br />
saa7133[0]: found at 0000:01:07.0, rev: 209, irq: 10, latency: 32, mmio: 0xe6000000<br />
saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]<br />
saa7133[0]: board init: gpio is 6400000<br />
input: HVR 1110 as /class/input/input3<br />
ir-kbd-i2c: HVR 1110 detected at i2c-2/2-0071/ir0 [saa7133[0]]<br />
saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92<br />
saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff<br />
saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff<br />
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br />
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff<br />
saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<br />
saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<br />
saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<br />
tuner 2-004b: chip found @ 0x96 (saa7133[0])<br />
tda8290 2-004b: setting tuner address to 61<br />
tuner 2-004b: type set to tda8290+75a<br />
saa7133[0]: registered device video0 [v4l2]<br />
saa7133[0]: registered device vbi0<br />
saa7133[0]: registered device radio0<br />
DVB: registering new adapter (saa7133[0])<br />
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...<br />
tda1004x: setting up plls for 48MHz sampling clock<br />
tda1004x: timeout waiting for DSP ready<br />
tda1004x: found firmware revision 0 -- invalid<br />
tda1004x: trying to boot from eeprom<br />
tda1004x: timeout waiting for DSP ready<br />
tda1004x: found firmware revision 0 -- invalid<br />
tda1004x: waiting for firmware upload...<br />
tda1004x: found firmware revision 20 -- ok<br />
saa7134 ALSA driver for DMA sound loaded<br />
saa7133[0]/alsa: saa7133[0] at 0xe6000000 irq 10 registered as card -1<br />
<br />
Once all needed modules have been loaded the card can be used, both analog tv/radio and dvb.<br />
If you use an analog tv app like kdetv/xdtv/tvtime, you'll have image but no sound.<br />
To have sound you'll have to redirect the sound stream from the card's alsa device to the soundcard's device using sox:<br />
sox -r 16000 -w -c 2 -t ossdsp /dev/dsp1 -t ossdsp /dev/dsp<br />
Same for analog radio.<br />
<br />
For dvb you'll use an application like kaffeine, so the 'sox' trick will not be needed.<br />
mplayer can be used for both analog tv and dvb, not needing to use sox for sound.<br />
mplayer -tv driver=v4l2:norm=PAL:chanlist=<chanlist_file>:alsa:adevice=hw.1:\<br />
audiorate=16000:immediatemode=0:forceaudio:amode=1 tv://<br />
mplayer -tv alsa:adevice=hw.1:audiorate=16000:immediatemode=0:forceaudio:amode=1 dvb://<Channel></div>Gomizhttps://fr.opensuse.org/index.php?title=Utilisateur:Gomiz&diff=7824Utilisateur:Gomiz2008-02-22T21:45:05Z<p>Gomiz : </p>
<hr />
<div><h1><span style="color:#C37903;">Salut à tous.</span></h1><br />
Ca me fait plaisir de pouvoir participer surtout que j'adore <span style="color:#008F00;">Suse!</span> que j'ai découvert un peu par hasard.<br> <br />
n'hésitez pas à me contacter :[mailto:chaume.mickael@yahoo.fr e-mail]<br />
<br><br><br />
Je suis actuellement étudiant en école d'ingénieur à l'UTBM sur Belfort(90) en génie électrique et systèmes de commande<br />
<br><br><br />
TOEIC:765/990 <br><br />
Zertifikat Deutsch:255/300 <br />
<br><br><br />
Liens pour la création Wiki : <br><br />
----<br />
[http://meta.wikimedia.org/wiki/Aide:Syntaxe_wiki Syntaxe Wiki] <br><br />
[http://fr.opensuse.org/Glossaire_d%27%C3%A9quivalences_entre_l%27anglais_et_le_fran%C3%A7ais Equivalence anglais technique et francais]<br><br />
[http://fr.opensuse.org/Liste_des_cat%C3%A9gories Liste des catégories] ex: à traduire, doc,... <br><br />
[[:Cat%C3%A9gorie:A_traduire]]<br><br />
[http://fr.opensuse.org/Communiquer#Forums Forums]</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:Kmahjongg.jpg&diff=7798Fichier:Kmahjongg.jpg2008-02-21T10:33:47Z<p>Gomiz : KMahjongg</p>
<hr />
<div>KMahjongg</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:Kmines.jpg&diff=7797Fichier:Kmines.jpg2008-02-21T10:33:12Z<p>Gomiz : KMines</p>
<hr />
<div>KMines</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:Krdc1.jpg&diff=7796Fichier:Krdc1.jpg2008-02-21T10:32:29Z<p>Gomiz : KRDC : Nouvelle "Session incrustée"</p>
<hr />
<div>KRDC : Nouvelle "Session incrustée"</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:Krdc.jpg&diff=7795Fichier:Krdc.jpg2008-02-21T10:30:56Z<p>Gomiz : Administration de KRDC sur KDE4</p>
<hr />
<div>Administration de KRDC sur KDE4</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:Kreversi.jpg&diff=7794Fichier:Kreversi.jpg2008-02-21T10:29:58Z<p>Gomiz : KReversi</p>
<hr />
<div>KReversi</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:Ksudoku.jpg&diff=7793Fichier:Ksudoku.jpg2008-02-21T10:28:24Z<p>Gomiz : KSudoku dans KDE4</p>
<hr />
<div>KSudoku dans KDE4</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:Kde4-kpat-end.jpg&diff=7792Fichier:Kde4-kpat-end.jpg2008-02-21T10:27:39Z<p>Gomiz : KPatience : Ecran de fin</p>
<hr />
<div>KPatience : Ecran de fin</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:Kde4-kpat.jpg&diff=7791Fichier:Kde4-kpat.jpg2008-02-21T10:26:42Z<p>Gomiz : </p>
<hr />
<div></div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:Kde4-kpat0.jpg&diff=7790Fichier:Kde4-kpat0.jpg2008-02-21T10:26:09Z<p>Gomiz : KPatience de KDE4</p>
<hr />
<div>KPatience de KDE4</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:103-kde4-amarok.jpg&diff=7789Fichier:103-kde4-amarok.jpg2008-02-21T10:21:28Z<p>Gomiz : Amarok dans KDE4</p>
<hr />
<div>Amarok dans KDE4</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:103-kde4-kalzium.jpg&diff=7788Fichier:103-kde4-kalzium.jpg2008-02-21T10:20:49Z<p>Gomiz : Greatly improved Kalzium</p>
<hr />
<div>Greatly improved Kalzium</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:103-kde4-kgeography.jpg&diff=7787Fichier:103-kde4-kgeography.jpg2008-02-21T10:20:16Z<p>Gomiz : KGeography</p>
<hr />
<div>KGeography</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:103-kde4-ksysguard.jpg&diff=7786Fichier:103-kde4-ksysguard.jpg2008-02-21T10:19:39Z<p>Gomiz : KSysGuard utilise maintenant le format SVG</p>
<hr />
<div>KSysGuard utilise maintenant le format SVG</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:103-kde4-systemsettings.jpg&diff=7785Fichier:103-kde4-systemsettings.jpg2008-02-21T10:19:06Z<p>Gomiz : Configuration système : un nouveau centre de contrôle pour KDE !</p>
<hr />
<div>Configuration système : un nouveau centre de contrôle pour KDE !</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:Kde4.jpg&diff=7784Fichier:Kde4.jpg2008-02-21T10:18:30Z<p>Gomiz : Bureau par défaut de KDE4 avec le navigateur de fichiers "Dolphin File Manager"</p>
<hr />
<div>Bureau par défaut de KDE4 avec le navigateur de fichiers "Dolphin File Manager"</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:103-YaST-Bluetooth.jpg&diff=7783Fichier:103-YaST-Bluetooth.jpg2008-02-21T10:13:29Z<p>Gomiz : Module Bluetooth</p>
<hr />
<div>Module Bluetooth</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:103-YaST-irda.jpg&diff=7782Fichier:103-YaST-irda.jpg2008-02-21T10:12:46Z<p>Gomiz : Configuration du module InfraRouge</p>
<hr />
<div>Configuration du module InfraRouge</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:103-YaST-Runlevel.jpg&diff=7781Fichier:103-YaST-Runlevel.jpg2008-02-21T10:11:34Z<p>Gomiz : Editeur simplifié de niveaux d'exécutions</p>
<hr />
<div>Editeur simplifié de niveaux d'exécutions</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:103-YaST-BootLoader.jpg&diff=7780Fichier:103-YaST-BootLoader.jpg2008-02-21T10:10:10Z<p>Gomiz : Chargement au démarrage</p>
<hr />
<div>Chargement au démarrage</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:103-YaST-Monitor.jpg&diff=7779Fichier:103-YaST-Monitor.jpg2008-02-21T10:09:25Z<p>Gomiz : Configuration des montieurs et cartes graphiques</p>
<hr />
<div>Configuration des montieurs et cartes graphiques</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:103-YaST-ImageCreator.jpg&diff=7778Fichier:103-YaST-ImageCreator.jpg2008-02-21T10:08:43Z<p>Gomiz : KIWI Création d'images</p>
<hr />
<div>KIWI Création d'images</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:103-YaST-NetworkCard.jpg&diff=7777Fichier:103-YaST-NetworkCard.jpg2008-02-21T10:07:54Z<p>Gomiz : Nouveau module de cartes réseau</p>
<hr />
<div>Nouveau module de cartes réseau</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:103-YaST-Patterns.jpg&diff=7776Fichier:103-YaST-Patterns.jpg2008-02-21T10:06:51Z<p>Gomiz : Gestions des patrons de programmes</p>
<hr />
<div>Gestions des patrons de programmes</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:103-YaST-SM.jpg&diff=7775Fichier:103-YaST-SM.jpg2008-02-21T10:05:50Z<p>Gomiz : Gestion des programmes</p>
<hr />
<div>Gestion des programmes</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:Gtk-Software-management.jpg&diff=7773Fichier:Gtk-Software-management.jpg2008-02-21T09:56:53Z<p>Gomiz : Software Management</p>
<hr />
<div>Software Management</div>Gomizhttps://fr.opensuse.org/index.php?title=Fichier:Gtk-Yast-apparmour.jpg&diff=7772Fichier:Gtk-Yast-apparmour.jpg2008-02-21T09:55:48Z<p>Gomiz : AppArmor Configuration</p>
<hr />
<div>AppArmor Configuration</div>Gomiz